murthy@utkcs2.cs.utk.edu (Nagesh Murthy) (07/27/90)
Has anybody attempted to use psview on a .ps image file. I mean a .rgb file converted to .ps image file. Some how when I say "psview <filename>.ps" it opens the psview window with nothing in it. I can print the same .ps file on a apple laser printer though. Any useful advice? Thanking in advance.
johnm@voltron.asd.sgi.com (John F. Malia) (07/27/90)
In article <1990Jul27.151338.27799@cs.utk.edu>, murthy@utkcs2.cs.utk.edu (Nagesh Murthy) writes: |> Has anybody attempted to use psview on a .ps image file. I mean a .rgb file |> converted to .ps image file. Some how when I say "psview <filename>.ps" it |> opens the psview window with nothing in it. I can print the same .ps file |> on a apple laser printer though. |> Thanking in advance. I had probelms also viewing .ps images with psview. Talking with Paul Haeberli, he suggested using psh. It worked, but you can't move the image around. johnm John Malia ::-{Q Silicon Graphics, Inc. | There's no place, anything like this AS Division 2011 Shoreline Blvd. | place, anywhere near this place, I/O Systems Dept. Mt. View, Ca. 95034 | ...so this must be the place! ************* What I say is what *I* think, not what SGI thinks ************
blbates@AERO4.LARC.NASA.GOV ("Brent L. Bates AAD/TAB MS361 x42854") (07/30/90)
Under 3.2 psview's image related commands (as well as others) don't work. I haven't check 3.3 to see if it has been fixed yet. I think part of the problem is that the transformation matrix function doesn't work. -- Brent L. Bates NASA-Langley Research Center M.S. 361 Hampton, Virginia 23665-5225 (804) 864-2854 E-mail: blbates@aero4.larc.nasa.gov or blbates@aero2.larc.nasa.gov