[comp.sys.sgi] icon-images wanted...

blbates@aero4.larc.nasa.gov ("Brent L. Bates AAD/TAB MS361 x42854") (10/05/90)

    What I did was to run one of my graphics programs, make the window
about 100x100 pixels, then I used snapshot to capture the image.
I used some utility to make sure the image was 100x100 or less, I don't
remember off hand what it was.  The first time I did this the image was
too big and that gave me problems, so make sure the image is 100x100 or
less. 
--

	Brent L. Bates
	NASA-Langley Research Center
	M.S. 361
	Hampton, Virginia  23665-5225
	(804) 864-2854
	E-mail: blbates@aero4.larc.nasa.gov or blbates@aero2.larc.nasa.gov

blbates@AERO4.LARC.NASA.GOV ("Brent L. Bates AAD/TAB MS361 x42854") (10/11/90)

   istat dumps out the header information of a SGI image file.  Part of
that information is the xy dimentions of the image.  If it is larger than
100x100 then you can't use it with pandora (to change login icon).
--

	Brent L. Bates
	NASA-Langley Research Center
	M.S. 361
	Hampton, Virginia  23665-5225
	(804) 864-2854
	E-mail: blbates@aero4.larc.nasa.gov or blbates@aero2.larc.nasa.gov