[comp.sys.sgi] FAQ: How to use DEC VMS from SGI telnet window running as iris-ansi-net type

hendrix@dtoa1.dt.navy.mil (Hendrix) (03/29/91)

OK. I think that I have it now.  The required setting on the VAX seems to be:
SET TERM/ANSI/NODEC_CRT
Simply saying
SET TERM/ANSI/DEV=UNKNOWN
doesn't remove the DEC_CRT setting even though it changes the terminal type
entry.  This applies at least to VMS4.6.

dane@yutai.dt.navy.mil