mcdonald@AEDC-VAX.AF.MIL (04/02/91)
I am looking for a utility that will do the following:
1. It will write a warning message to a terminal that has been
inactive for > INACTIVE amount of time.
2. It will then lock the terminal if the user does not use it.
3. If the user is on a PC or other ascii terminal logging into
my IRIS, it should use some type utility to lock the ascii
terminal.
4. If the user is on the Graphics Console it should use some type
of graphics screen locking procedure.
5. After the screen has been locked for a preset amount of time,
the user should be logged off, (both on ascii terminals & the
graphics console).
Any help/suggestions/clues to any utilities available will be appreciated:
Thanks.
-----------------------------------------------------------------------------
vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
| Kenneth M. McDonald * OAO Corp * Arnold Engineering Development Center |
| MS 120 * Arnold AFS, TN 37389-9998 * (615) 454-3413 |
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
INTERNET:
mcdonald@aedc-vax.af.mil
LOCAL:
c60244@ccfiris