benz@CS.BUFFALO.EDU (David Benz) (05/23/89)
I would like to add more disk drive capacity to my system, but don't have the money for a hard drive and controller card. I have a z100 with two full height 5.25" 360K drives, running off a z-207 controller, MSDOS 2.something. Will any of the following drives work in the 100: 3.5" 720K, 3.5" 1.44MB, 5.25" 1.2MB, or more 5.25" 360K half heights? Installation info apreciated also (internal/external mounting, seperate power supply needed yes/no, etc..). Thanks Dave Benz SUNY at Buffalo CS Dept. internet:benz@cs.buffalo.edu bitnet: benz@sunybcs.BITNET csnet: benz@buffalo.csnet uucp: ..!{ames,boulder,decvax,rutgers}!sunybcs!benz
usenet@cps3xx.UUCP (Usenet file owner) (05/23/89)
In article <8905221806.AA02767@bellatrix.cs.Buffalo.EDU> benz@CS.BUFFALO.EDU (David Benz) writes: >I would like to add more disk drive capacity to my system, but don't >have the money for a hard drive and controller card. I have a z100 >with two full height 5.25" 360K drives, running off a z-207 >controller, MSDOS 2.something. Will any of the following drives work >in the 100: 3.5" 720K, 3.5" 1.44MB, 5.25" 1.2MB, or more 5.25" 360K >half heights? Installation info apreciated also (internal/external >mounting, seperate power supply needed yes/no, etc..). I understand that the quad density 5.25 disks will work just fine from the 8" drive part of the controller. I believe that Payload (don't have the address, check a REMark or SEXTANT or e-mail me and I'll find it) was selling the drives an a cable to connect to the controller. Mark Urban-Lurain Computer Science Dept. Michigan State University urban@cpswh.cps.msu.edu