cutter@cutsys.UUCP (Bernie Hoffstadt ) (02/07/88)
We have a Digital Professional 350 microcomputer and assorted
hardware/software for sale as follows:
Pro350 computer w/256k memory, 2 RX50 floppies, amber monitor
LA-50 printer
-------------
256k memory expansion card
video bit-map graphics card
P/OS version 1.7
-------------
10 Meg hard disk w/controller
Pro Venix V2.0 (SystemV V2.0 based) runtime & development
w/ C, Fortran, & Pascal compilers.
We will sell the computer only with everything listed, but will
sell the cards & P/OS and/or hard disk w/Pro Venix separately. Offers
can be made by phone or email.
--
Bernie Hoffstadt (503) 752-5929 * Internet: cutter%cutsys.UUCP@CS.ORST.EDU
1437 N.W. 9th st. -or- 753-1646 * -or- cutter@jacobs.CS.ORST.EDU
Corvallis, Oregon 97330 **** UUCP: {tektronix,hp-pcd}!orstcs!cutsys!cutter neff@leadsv.UUCP (Michael Neff) (02/17/88)
In article <281@cutsys.UUCP> cutter@cutsys.UUCP (Bernie Hoffstadt (753-1646)) writes: > > We have a Digital Professional 350 microcomputer and assorted >hardware/software for sale as follows: > > Pro350 computer w/256k memory, 2 RX50 floppies, amber monitor [stuff deleted] >-- >Bernie Hoffstadt (503) 752-5929 * Internet: cutter%cutsys.UUCP@CS.ORST.EDU Hiya Bernie, Watcha askin' for the Pro? Some of us would like to go fishin' and wouldn't mind getting a spare boat anchor. Does $20 sound OK? Don't need the VENIX, that doesn't sink as well. ;-) We could also use a few more bookends here at the office where we don't have enough bookcases. :-) :-) :-) :-) || Wiley E. Coyote || || neff@leadsv.UUCP ^^ or _(oo)_ Coyote@cup.portal.com </-||-\> {} ( lupus 'lectronicus ) / \ ~~~~~~~~~~~\ Disclaimer: This material is in no way meant to represent a serious statement on the part of myself or my employer.
jfd@beta.UUCP (John Davis) (02/18/88)
I have a Pro-350 with an RT-11 license as well as P/OS. I would like to plug my VT102 with its own printer into the Pro-350 printer port and get rid of the PI handler. I have the Pro Technical Manual and I know how to jumper the printer cable so that the printer port functions as a console port. I have SYSGENed systems on this machine successfully. What I don't know how to do is gen a system that will boot up without PI and run off either the printer/console port or the modem port. I have read the 5.1 SYSGEN manual several times. Any advice?