ralii@PAWL.RPI.EDU (02/09/89)
I have another graphics question on the RB. Does any one have documentation
on the RB ReGIS program? If so, can you also tell me the differences between
what the RB version can do and, say, a GIGI (VT125?) terminal emulator.
If some of you have not guessed, I am considering writing a graphics terminal
emulator for the RB with probably the 2 popular: ReGIS, and Tek 4010/4014,
because, it seems that the RB is not supported in the newest MS-Kermit...
(I can't understand why... :-) ).
I have an old GIGI reference card for ReGIS and used to program on it way back
when, so if someone can give me a lead on what RB ReGIS does, I don't have to
spend a few hours in DEBUG.
Any suggestions on my (maybe) project are welcome via the following:
E-Mail: ralii@pawl.rpi.edu
Thanks in advance...
---Dick Locke
P.S. This project will probably turn into a COMM package.art@MITRE.MITRE.ORG (Art McClinton) (02/10/89)
Send me your address and I will mail you a copy of the Rainbow Regis manual.
It is small (30 pages) but you are correct, I lists the differences between
REGIS on various terminals.
*
*---Art
*
*Arthur T. McClinton Jr. ARPA: ART@MITRE.ARPA
*Mitre Corporation MS-Z305 Phone: 703-883-6356
*1820 Dolley Madison Blvd Internal Mitre: ART@MWVMS or M10319@MWVM
*McLean, Va. 22102 DECUS DCS: MCCLINTON
*
=-=- This note is in response to yours which follows -=-=
I have another graphics question on the RB. Does any one have documentation
on the RB ReGIS program? If so, can you also tell me the differences between
what the RB version can do and, say, a GIGI (VT125?) terminal emulator.
If some of you have not guessed, I am considering writing a graphics terminal
emulator for the RB with probably the 2 popular: ReGIS, and Tek 4010/4014,
because, it seems that the RB is not supported in the newest MS-Kermit...
(I can't understand why... :-) ).
I have an old GIGI reference card for ReGIS and used to program on it way back
when, so if someone can give me a lead on what RB ReGIS does, I don't have to
spend a few hours in DEBUG.
Any suggestions on my (maybe) project are welcome via the following:
E-Mail: ralii@pawl.rpi.edu
Thanks in advance...
---Dick Locke
P.S. This project will probably turn into a COMM package.