kls@ditka.UUCP (Karl Swartz) (06/04/89)
[I'm posting this for Hank Vaccaro; please respond directly to
him and not to me.]
From recent messages here, I get the idea that C-kermit works fine
under AIX. Not for me.
I just finished making C-Kermit 4E(072) using the sys3 flag for an RT
running AIX 2.2.1. No real compile trouble, but using it is another
matter. It hangs if I attempt to "set line /dev/tty?". "set line
/dev/ltty?" works, but kermit can't see the modem's responses so it
times out. (Yes, the Hayes is set to E1Q0.) Sometimes it fails to
remove lock files after timing out (at least that's what the message
says).
The only change to the c code was to modify the attention string in
ckudia.c to "ATE1Q0" just to be "safe".
The same port and modem settings work fine with cu and uucp. The port
is set up as remote (modem protocol), pro = dtr, and sns = false. Any
ideas on what's wrong?
Hank Vaccaro Los Alamos National Laboratory
1-505/667-7777 ames!hc!rt1!ws -or- hsv@beta.lanl.gov
--
Karl Swartz |UUCP {ames!hc!rt1,decvax!zinn}!ditka!kls
1-505/667-7777 (work) |ARPA rt1!ditka!kls@hc.dspo.gov
1-505/672-3113 (home) |BIX kswartz
"I never let my schooling get in the way of my education." (Twain)