Mark Becker <Cent.Mbeck%MIT-OZ@MIT-MC> (02/07/85)
Uh oh. One of the Shugart 851 8" drives in a cabinet started making a squeeking noise shortly after being turned on. I took it out, didn't find any loose pieces, turned it back on again, and the noise got louder. Then I shut it down and took it off-line. I presume the spindle bearings are dry. But what about lubricants? Is there something specific I should put in there or will my can of spray lubricant (something called "tefrawn") do? Mark Becker Cent.Mbeck%Mit-Oz@Mit-Mc
mlsmith@NADC (02/07/85)
There was a special kind of oil we used, similar to sewing machine oil, but thicker to lubricate the head guide bar and spindle of our 8" drives. One note of caution: a little goes a long way. Sorry but I don't have the name of the manufacturer.