gchunt%albion.utah.edu@cs.utah.edu (Galen Hunt) (02/06/91)
A while back I posted a message asking for information about the switches on the E70 drive. Several people have since then sent email asking a summary of the information I received. The most complete information came from one source to whom I am greatly indebted. Thanks for the help! > From: Robert MacKinnon <robmack@eik.ii.uib.no> > > If the drive is a type 0667 then the switches are : > > 1 (on) = power on via software > (off) = power on via the on/off switch on the RT > 2 = not used (diags??) > 3 (on) = 512 byte sectors > (off) = 256 byte sectors > 4,5,6 = Drive select (binary) > 4 off 5 on 6 off = 2 > (4 2 1) > >cyls = 583 >heads = 7 >sectors = 36 > > Terminating resistor should be standard ESDI. (I'm not sure about this.) gchunt@peruvian.utah.edu