graham@csli.Stanford.EDU (William Graham) (05/02/91)
I'm attempting to attach a Calcomp 2000 graphics tablet to a 6150 runing 4.3 via the planar serial port. I would like to use the TABLDISC line discipline. Everything works as it is supposed to, provided Xibm is not running. If the X server is running, reads on the serial port block. In addition, the stylus for the graphics tablet appears to control the X cursor... but incorrectly. Any stylus motion moves the cursor to the bottom right hand corner of the display. So it appears the X server is intercepting the tablet input. Whether deliberately or inadvertantly, I do not know. This would be acceptable behavior, provided it worked correctly. Any information regarding what is supposed to happen would be greatly appreciated. Bill Graham graham@csli.stanford.edu