PAUL@ACADIA.BITNET (Paul Steele - Acadia University) (09/08/88)
Does NCSA Telnet work on the WD8003E and WD8003EBT (boot prom version). WE have discovered a slight difference between the two boards which seem to make any software configured with a RAM buffer address of C4000 not to work. SU-PCIP configures its driver for C4000 and therefore does not work under the WD8003EBT. Since we do not have FTP access, there is no quick way for us to get NCSA Telnet except via mail, which we have done. Will it work with the WD8003EBT? Paul Steele Paul@Acadia.bitnet
CC06067@UAFSYSB.BITNET (Christopher Corke) (09/09/88)
If you don't have FTP access, I believe you can get NCSA Telnet from listserv at RPICICGE.. The commands you need to send LISTSERV at RPICICGE are: /pdget pd:<msdos.telnet>tel22doc.arc /pdget pd:<msdos.telnet>tel22src.arc /pdget pd:<msdos.telnet>telnet22.arc ----------------------------------------------- __ / ) / / /_ __ o _ (__/ / /_/ (_(_/_)_ Smail: University of Arkansas Christopher C. Corke 220 A.D.S.B. System Programmer I 155 Razorback Road University of Arkansas (Postmaster & Info-Rep) Fayetteville, AR. 72701 Department of Computing Services (501) 575-2905 BIT : <CC06067@UAFSYSB.Bitnet> Acknowledge-To: <CC06067@UAFSYSB>