mjhammel@Kepler.dell.com (Michael J. Hammel) (12/12/89)
I'm having trouble getting NCSA 2.2tn to run with the 3C503 packet driver I downloaded from Clarkson. Below are my autoexec.bat and config.tel files. When I type "telnet" (I have a batch file pointing to the config.tel file, as per the manual) the screen clears and at the top in green I get: NCSA Telnet, reading configuration file... and then nothing. My packet driver loads without error when I boot. My 3C503 card has the following settings: irq 3 Base I/O 2e0 Shared mem dc0000 transciever 1 Anyone have any ideas what I'm doing wrong? Autoexec file: --------------- @echo off prompt $p$g path=c:\system\dos;c:\ncsa c:\system\mouse2\mouse c:\ncsa\drivers\3c503 0x7a 3 0x2e0 1 echo ================================================= echo The system is now ready to use PC/TCP echo ================================================= config.tel file: ----------------- # Example host file for Telnet 2.2D and 2.2TN # # Version 2.2D enhancements developed at Clarkson University # 1/26/89 # By Brad Clements # Bugs to bkc@omnigate.clarkson.edu # myip=64.0.0.64 hardware=packet interrupt=3 address=0 ioaddr=0 video=auto bios=no tek=yes capfile=c:\capfile.out hpfile=c:\hp.out psfile=c:\ps.out tekfile=c:\tek.out ftp=yes passfile="c:\lib\ncsa\passwd.fil" rcp=yes #domaintime=4 #domainretry=4 #domainslist="dell.com" arptime=10 name=default retrans=5 rwin=2048 contime=10 mtu=1024 maxseg=512 erase=delete clearsave=yes scrollback=100 nfcolor=white nbcolor=blue rfcolor=YELLOW rbcolor=blue ufcolor=red ubcolor=blue #name=server1 #host=server1.dell.com #hostip=64.0.0.92 #nameserver=1 name=kepler host=kepler.dell.com hostip=64.0.0.205 Thanks for any help! Michael J. Hammel | internet:mjhammel@Kepler.dell.com Dell Computer Corp. | Also: ...!dell!mikeh or 73377.3467@compuserve.com "I know engineers, they looooove to change things" L. McCoy Disclaimer equ standard