KGJHH@ASUACAD.BITNET (Jim Howard) (01/12/90)
Does anyone know if the 3c523 packet driver distributed through Clarkson has the software setting for internal vs. external transceiver hard coded into it? I get a "TDR ok" message on startup, but then it just hangs.
BHOLMES@CMS.CC.WAYNE.EDU (Brian Holmes) (01/12/90)
>Does anyone know if the 3c523 packet driver distributed through Clarkson >has the software setting for internal vs. external transceiver hard >coded into it? I get a "TDR ok" message on startup, but then it just >hangs. It works fine for me with an external transceiver. Are you trying to use BNC? Brian Holmes UCC Operating Systems & Communications PHONE: (313) 577-3750 FAX=577-5626 Wayne State University BITNET: BHOLMES@WAYNEST1 5925 Woodward INTERNET: BHOLMES@CMS.CC.WAYNE.EDU Detroit, MI 48202 U.S.A
german@UX1.CSO.UIUC.EDU (Greg German) (01/16/90)
I have used the packet driver for the 3c523 with NCSA Telnet and Netware as well as a few other packages without trouble. I have been using the onboard transceiver. I sometimes get error messages from the TDR code, but the card has always worked. I have switched from using INT 3 to INT 7 recently so as not to conflict with the internal modem I installed. Greg German (german@sonne.CSO.UIUC.EDU) (217-333-8293) US Mail: Univ of Illinois, CSO, 1304 W Springfield Ave, Urbana, IL 61801 Office: 129 Digital Computer Lab., Network Design Office