rick@ut-emx.UUCP (Rick Watson) (03/07/90)
Should NCSA Telnet (2.3b5) work with the SLIP8250 packet driver? I get: Packet Access Type Error 2 Can't Access IP handle interface type 1 Packet Driver probably not loaded The packet driver is loaded via: slip8250 0x61 slip 4 0x3f8 2400 3000 3000 and config.tel contains: hardware=packet ioaddr=61 Rick Watson The University of Texas Computation Center, 512/471-3241 internet: watson@utadnx.cc.utexas.edu bitnet: watson@utadnx uucp: ...!cs.utexas.edu!ut-emx!rick span: utspan::utadnx::watson