rick@gtisqr.uucp (Rick Groeneveld) (07/20/90)
I have been trying to connect to our network using NCSA telnet over the serial port with the SLIP packet driver interface. Using the KA9Q Internet Protocol Package with the packet driver works very well so I am assuming that the problem is in NCSA telnet or my config.tel file. Has anybody else managed to get this to work? Does anybody have any ideas? See my config.tel file below. Please respond via email. Thanks in advance. myname=laptop.gtisqr.UUCP termtype="vt100" myip=88.0.0.1 netmask=255.255.255.0 hardware=packet ioaddr=6a address=6 tek=yes video=cga bios=no ftp=yes rcp=yes domain="gtisqr.uucp" arptime=8 name = default hostip=88.0.0.100 gateway=1 scrollback=400 erase=backspace vtwrap=yes crmap=4.3BSDCRNUL contime=20 retrans=7 mtu=512 maxseg=512 rwin=512 --- Rick Groeneveld UUCP: {smart-host}!gtisqr!rick Software Engineer Bell: (206) 742-9111 Global Technology Intl. Inc. Mukilteo Washington. -- Rick Groeneveld UUCP: {smart-host}!gtisqr!rick Software Engineer Bell: (206) 742-9111 Global Technology Intl. Inc. Mukilteo Washington.