eva@uwovax.uwo.ca (Eva Placko) (08/01/90)
I have a problem running NCSA Telnet v2.2D using the NI5210 packet driver. The packet driver loads without trouble (using NI5210 0x60 0x3 0x360 0xC800), but when either Telbin or Ftpbin is started up, the following message appears: "Packet driver NI5210 class 1 type 11 Requested packet class does not match driver class" What does this message mean? Am I using the wrong packet driver? The PC used is a Packard Bell 286 with an AT bus. Any help would be greatly appreciated. Thanks. -- Eva Placko Computing and Communications Services University of Western Ontario, London, Ontario INTERNET: eva@UWO.CA BITNET: eva@uwovax.BITNET Phone: (519) 661-2151 ext.6027
bkc@OMNIGATE.CLARKSON.EDU (Brad Clements) (08/01/90)
be sure that your config.tel file is set as follows hardware=packet ioaddr=0 address=0 | Brad Clements bkc@omnigate.clarkson.edu bkc@clutx.bitnet | Sr. Network Engineer Clarkson University (315)268-2292