tksjmi@sybil.cs.Buffalo.EDU (JoAnn Illuzzi) (08/31/90)
I have an IBM AT using desqview with lots of memory via a fully loaded
RAMpage. The machine has 2 3c501s, set at differnet interrupts,
dma channels, and io addrs.
I want to run NCSA Telnet 2.2tn and ka9q ver 900214NOS together on this
machine via packet drivers. I am using ver 5.0 of the 3c501 packet
driver.
I invoke one packet driver at 0x60, another at 0x63, before starting
up desqview. They both load ok. I have set NCSA Telnet's config.tel
to use 0x60 via
ioaddr=60
and configed ka9q to use 0x63 via
attach packet 0x63 ec0 3 1500 [128.205.1.13]
in my AUTOEXEC.NET.
My problem is that I cannot get NCSA and ka9q to run in separate
windows, each using a different packet driver. The first window opens
up fine and works, but the second window hangs solid, I have to
power off the machine. It doesn't matter if I start ka9q or ncsa
first, the first window works, the second window hangs.
Anyone have any ideas on what might be the problem?
thanks
JoAnnssw@cica.cica.indiana.edu (Steve Wallace) (08/31/90)
You have to load the packet drivers with in the windows you are running ncsa/ka9q. Steven Wallace wallaces@ucs.indiana.edu