DMPM@DUKEMC.BITNET (James Dryfoos- PostMaster) (09/21/90)
How do you tell NCSA to use the aui port on the 3c523 instead of the thin port? Thanks Jim Dryfoos
rxxf@lanl.gov (Richard Alyn Ford) (09/22/90)
Boot PS/2 from reference disk pick option to change configuration change configuration on 3c523 parameters displayed from internal transceiver to external good luck, Alyn Ford Los Alamos National Labs rxxf@lanl.gov
jbreeden@netcom.UUCP (John Breeden) (09/23/90)
In article <2FECF03F71DF80BD3F@dukemc> DMPM@DUKEMC.BITNET (James Dryfoos- PostMaster) writes: >How do you tell NCSA to use the aui port on the 3c523 instead >of the thin port? > >Thanks > >Jim Dryfoos 1. 3Com's ethernet configuration device driver has a command line switch to direct the card to either the thin-net or AUI port. 2. Run NCSA on the Clarkson Packet Driver. The packet driver supports a command line switch for which port (at least 503.com does as of Version 6, I assume that the driver for the 523 does too). 3. Run NCSA on an NDIS driver (via FTP's dis_pkt.dos). 3Com's NDIS MAC driver has an entry in protocol.ini for which port to use. -- John Robert Breeden, netcom!jbreeden@apple.com, apple!netcom!jbreeden, ATTMAIL:!jbreeden ------------------------------------------------------------------- "The nice thing about standards is that you have so many to choose from. If you don't like any of them, you just wait for next year's model."