PVJQC@CUNYVM (09/29/90)
Forgive me if this problem has already been taken care of.
I have a network of 20 IBM PS/2 model 80s with 3com 3c523 boards and running
3+share net. software under DOS 3.3. These are connected on thin ethernet
with some Sun and NeXT workstations. I have NCSA's Telnet/FTP which I use
to get on to suns/nexts. If I am logged on to 3COM network and then get iinto
ftp/telnet, I get a network error after quiting from ftp/telnet and I have to
reboot to get back into 3com net. I recently received a new set of packet drive
s
for a variety of boards from Clarkson Uni. I could not get it to work.
I would appreciate some response.
Thanks a lot.
Prashant
-------
*********************************************************
* PRASHANT V. JOSHI *
* CITY UNIVERSITY OF NEW YORK. *
* INTERNET ADDRESS: PVJQC@CUNYVM.CUNY.EDU, *
* BITNET ADDRESS : PRASHANT@QCVAX.BITNET *
* *
*********************************************************nelson@sun.soe.clarkson.edu (Russ Nelson) (09/29/90)
In article <90271.160739PVJQC@CUNYVM.BITNET> PVJQC@CUNYVM writes:
Forgive me if this problem has already been taken care of. I have
a network of 20 IBM PS/2 model 80s with 3com 3c523 boards and
running 3+share net. software under DOS 3.3. ... I recently
received a new set of packet drivers for a variety of boards from
Clarkson Uni. I could not get it to work.
Unfortunately, 3+share net doesn't support the packet drivers (that I know
of). Not to mention the fact that the 6.x and 7.x 3c523 driver is broken,
and will only work if you run the 5.x first. I've got an idea what's wrong,
and a new version of the 7.x 3c523 driver. Send me mail if you want to test
a copy.
-russ
--
--russ (nelson@clutx [.bitnet | .clarkson.edu]) Russ.Nelson@$315.268.6667
It's better to get mugged than to live a life of fear -- Freeman Dyson