[comp.protocols.tcp-ip.ibmpc] INT 14 under FTP Software's PC/TCP

dsc3rjs@NMDSC20.NMDSC.NNMC.NAVY.MIL (Bob Stratton) (10/11/90)

Hello,

I am at a site with a large number of PC's running FTP Software's PC/TCP
(mostly version 2.03). 

I have a requirement for a decent INT14-type interface, but can't get
a clear answer as to which versions of FTP's stuff have INT14 support.

Is anyone currently using a version (or aware of a version) of FTP's
stuff that will give me this type of functionality? 

Thanks in advance!

Bob Stratton 		| dsc3rjs@nmdsc20.nmdsc.nnmc.navy.mil [DDN/Internet]
NAVMEDATASERVCEN	| dsc3rjs@vmnmdsc		      [BITNET]
(Innova Comms. / AT&T)	| 295-3371 [AV]    +1 301 295 3371    [PSTNet]
Disclaimer: The above opinions are mine alone - Who else would want them?

fks@FTP.COM (Frances Selkirk) (10/13/90)

Versions 2.04 and 2.05 (being released 10/22) have int-14 support. Anyone
who has questions of this sort is welcome to mail them to me at info@ftp.com.


Frances Kirk Selkirk		 info@ftp.com	           (617) 246-0900
FTP Software, Inc.		 26 Princess Street, Wakefield, MA  01880

dittman@skbat.csc.ti.com (Eric Dittman) (10/13/90)

In article <9010111622.AA08582@nmdsc20.nmdsc.nnmc.navy.mil>, dsc3rjs@NMDSC20.NMDSC.NNMC.NAVY.MIL (Bob Stratton) writes:
> Is anyone currently using a version (or aware of a version) of FTP's
> stuff that will give me this type of functionality? 

Bob, I'm currently (right at this moment!) using PC/TCP 2.04's tnglass
INT14 driver with MSKERMIT.  Works just fine.

Eric Dittman
Texas Instruments - Component Test Facility
dittman@skitzo.csc.ti.com
dittman@skbat.csc.ti.com

Disclaimer:  I don't speak for Texas Instruments or the Component Test
             Facility.  I don't even speak for myself.

jbvb@FTP.COM ("James B. Van Bokkelen") (10/13/90)

Since PC/TCP 2.04 came out in September of 1989, our TNGLASS and RLOGINGL
applications have supported INT 14 redirection to the net.

James B. VanBokkelen		26 Princess St., Wakefield, MA  01880
FTP Software Inc.		voice: (617) 246-0900  fax: (617) 246-0901