jack@FOGHORN.SFSU.EDU (Jack Tse) (11/29/90)
> Subject: IBM file transfer with TCP/IP
Good morning!
Is there a PC software that supports the IBM IND$FILE type file transfer in
a TCP/IP connection? For example, using Clarkson's CUTCP software, telnet
to an IBM host and do an IND$FILE file transfer. Does TN3270 support this
type of file transfer?
Thank you in advance for your response.
Jack Tse
Network Support
San Francisco State University
Address: jack@foghorn.sfsu.edu
dsc3rjs@NMDSC20.NMDSC.NNMC.NAVY.MIL (Bob Stratton) (11/30/90)
>Is there a PC software that supports the IBM IND$FILE type file transfer in >a TCP/IP connection? For example, using Clarkson's CUTCP software, telnet >to an IBM host and do an IND$FILE file transfer. Does TN3270 support this >type of file transfer? Try Crosstalk Mark 4 from DCA/Crosstalk Communications 1000 Alderman Drive Alpharetta, GA 30201-4199 Gen. Info: 404-442-4930 Tech. Support: 404-442-3210 It supports KERMIT, IND$FILE, X/Y/ZMODEM, and has INT14 support for use across Local Area Networks. I hope this helps, Bob Stratton | dsc3rjs@nmdsc20.nmdsc.nnmc.navy.mil [DDN/Internet] NAVMEDATASERVCEN | dsc3rjs@vmnmdsc [BITNET] (Innova Comms. / AT&T) | 295-3503 [AV] +1 301 295 3371 [PSTNet] Disclaimer: The above opinions are mine alone - Who else would want them?
jbvb@FTP.COM ("James B. Van Bokkelen") (12/04/90)
It ...(a DOS 3270 emulator)... has INT14 support for use
across Local Area Networks.
Note that you can't do TN3270 over standard INT 14h emulation - the current
TN3270 protocol requires negotiating at least two Telnet options, and there
is no way to pass the information on the current option state back and forth
across INT 14.
James B. VanBokkelen 26 Princess St., Wakefield, MA 01880
FTP Software Inc. voice: (617) 246-0900 fax: (617) 246-0901