mholt@ssdc (mark holt) (03/30/91)
I need some help setting up a 3COM 3C505 Ethernet card for KA9Q. I have read manuals for setting up AUTOEXEC.BAT and AUTOEXEC.NET, however, I have yet to receive the 3COM manual and need to get started. I believe my problem is in how I have the board itself configured and would appreciate it if someone would check this out for me. AUTOEXEC.BAT contains: 3C505 0x7e 9 AUTOEXEC.NET contains: attach packet 0x7e 9 My board is configured as follows: INT 9 DMA 5 Bit MEM ADDR 13 0 IO ADDR 4 0 14 1 5 0 15 1 6 0 16 0 7 0 17 0 8 1 18 1 9 1 19 1 EN 1 ROM SEL A15 OFF A16 OFF How does one select between thick and thin wire? I am using the thick wire. Maybe this is a hint - the lights are NOT lit on the thick wire transceiver. mark Mark L Holt Sterling Software Vienna, VA 703.356.3551