DMPM@DUKEMC.BITNET (James Dryfoos- PostMaster) (04/05/91)
The following shows the loading of the 3c523 packet version 9.1 which works fine. After loading I can run the NCSA package. However, I find I cannot run the CUTCP package which I do run on the 3c503 (so I know it works). Any ideas? I also include attempted startup of CUTCP telbin. What is "Requested packet class does not match driver class" telling me? Thanks, Jim Dryfoos Packet driver is at segment 1718 TDR: Ok Interrupt number 0x3 (3) I/O port 0x300 (768) Memory address 0xC000 (49152) My Ethernet address is 02:60:8C:1B:61:EA C:\> Console messages: CUTCP/CUTE Clarkson University Tcp Communication Package Clarkson University Terminal Emulator [CUTE:2.2D/TC-D] Alt-H presents a summary of special keys Warning, packet driver vector invalid, using default search Packet driver (3C523) Class 1 Type 13 Version 9 Extended 2 Requested packet class does not match driver class Packet driver (3C523) Class 1 Type 13 Version 9 Extended 2 Requested packet class does not match driver class Configfile: Warning, this version does not support TN3270. MAP3270 ignored Could not initialize hardware level network driver Error initializing network or getting configuration file C:\>
ccgavin@brolga.cc.uq.oz.au (Gavin Stone-Tolcher) (04/12/91)
DMPM@DUKEMC.BITNET (James Dryfoos- PostMaster) writes: >The following shows the loading of the 3c523 packet version 9.1 >which works fine. After loading I can run the NCSA package. >However, I find I cannot run the CUTCP package which I do run >on the 3c503 (so I know it works). Any ideas? >I also include attempted startup of CUTCP telbin. >What is "Requested packet class does not match driver class" telling me? > Console messages: CUTCP/CUTE >Clarkson University Tcp Communication Package >Clarkson University Terminal Emulator [CUTE:2.2D/TC-D] >Alt-H presents a summary of special keys >Warning, packet driver vector invalid, using default search >Packet driver (3C523) >Class 1 Type 13 Version 9 Extended 2 >Requested packet class does not match driver class >Packet driver (3C523) >Class 1 Type 13 Version 9 Extended 2 >Requested packet class does not match driver class >Configfile: Warning, this version does not support TN3270. MAP3270 ignored >Could not initialize hardware level network driver >Error initializing network or getting configuration file >C:\> I am getting an identical error trying to use a turbo DEPCA board with CUTCP. If anyone has any ideas why James' problem is happening let me know too please. Thanks, Gavin... -- Internet: ccgavin@cc.uq.oz.au Phone: +61 7 377 3942 Postal: Gavin Stone-Tolcher, Network Operations, Prentice Computer Centre The University of Queensland, St Lucia, QLD Australia 4067.