schmoldt@dcdwest.UUCP (Daryl Schmoldt) (06/30/88)
Greetings All, I have just recently acquired a program called HyperSound which I use in conjunction with the MacRecorder sound digitizing system. All was working well up until a little while ago and now I seem to be having problems getting the HC 'play' command to work properly. HyperSound allows you to record a sound and then paste a button which will play that sound onto a card. The digitized sound is in the form of a 'SND' resource file which is copied into the stack. When I go to examine the stacks resources I see that the desired SND resources are indeed there but when I issue a 'play "mySound"' command the sound does not always play. If I quit HyperCard and try again it will then work a few times and then it goes back into the failure mode which I just described. Is there anyone else out there on the net that uses the HyperSound program? If so have you experienced this problem? Do you know of or can you suggest a fix for it? Any help on this matter would be grately appreciated. A t D h V a A n N k C s E, Daryl Schmoldt e-mail: ucsd!dcdwest!schmoldt or ncr-sd!dcdwest!schmoldt voice: (619) 578-3080 US Mail: ITT-DCD 10060 Carroll Canyon Road San Diego, CA 92131