ahlenius@cell.mot.COM (Mark Ahlenius) (01/13/90)
Is anyone familiar with using the Print Report function in Hypercard ? Each time I use it I have 2 problems: 1) the space betwext the 1st and 2nd label is always off by one, the remaining label spacing is fine. 2). I cannot get it to use any other fonts than the one it defaults to - which is about an 8 pt. Helv. This font is really too small for easy reading on mailing labels. thanks in advance. -- =============== regards 'mark ============================================= Mark Ahlenius voice:(708)-632-5346 email: uunet!motcid!ahleniusm Motorola Inc. fax: (708)-632-2413 Arlington, Hts. IL, USA 60004
stone@hydra.unm.edu (Andrew Stone) (01/14/90)
In article <768@granite3.UUCP> ahlenius@cell.mot.COM (Mark Ahlenius) writes: >Is anyone familiar with using the Print Report function >in Hypercard ? > >Each time I use it I have 2 problems: >1) the space betwext the 1st and 2nd label is always > off by one, the remaining label spacing is fine. >2). I cannot get it to use any other fonts than the one > it defaults to - which is about an 8 pt. Helv. > Actually 10 pt, but it is small The laserwriter prints them fine, but I just recently wrestled with this on a client's imagewriter. [printdrivers from hell] The solution: have a fake card at the front of the stack or background, set the tractor feed labels [assume 1" label width] at the second hole even with the top of the plexiglas cover [ie, off by one line]. As for the default font, ..... still waiting for 2.0 ..... andrew ||<<++>>||<<-->>||<<==>>||<<++>>||<<??>>||<<++>>||<<-->>||<<==>>||<<++>>|| !! Andrew Stone !! Stone Design Corp. !! !! stone@hydra.unm.edu <> Albuquerque, New Mexico !! ||<<++>>||<<-->>||<<==>>||<<++>>||<<??>>||<<++>>||<<-->>||<<==>>||<<++>>||