ciru@fennel.cc.uwa.oz.au (11/10/90)
Message sent on Saturday, 10 November 1990 at 9:11 AM Is there anyone out there who is using Hypercard 2.0 and has had problems/delays when using the Print Card command? I've just converted our ordering system to Hyper 2 and in the past, due to the limitations of reporting, have used Print Card as a copy of the requesition. The system works over an appletalk network printer to a Laserwriter NT. For some reason after the conversion, printing a card now takes nearly 3 minutes!! Does anyone know what might be the problem. I've tried changing various parameters within the print dialog box etc etc, however, nothing seems to make any difference. We are running System 6.05 over a small network of 4 Macs, a the Laserwriter and an Imagewriter. I would appreciate any input at this point, as setting up a report to do the job is still a ways off and we'll have to use print card for a time still. Thanks in advance....... *********************************************************** * Mike Schon-Hegrad * * Research Officer * * Western Australian Research Institute for Child Health * * Princess Margaret Hospital * * Thomas Street, Subiaco * * West Australia 6008 * * * * CIRU@FENNEL.CC.UWA.OZ.AU * ***********************************************************