gb2a+@andrew.cmu.edu (George J. Baxter) (11/13/90)
Hey gang--
Is there a general program out there that will convert 1.2.# stacks
to the new 2.0 format?? FTP sites? (Sorry if this has already gone
over the net, I've
been off recently..)
gjb
-----------------------
gb2a@andrew.cmu.edu baxter@a.cfr.cmu.edu
baxter@imga.cfr.cmu.edu q100gb2a@vb.cc.cmu.edu
"Only a Hawaiian can say Humuhumunukunukuapuaa five times fast, correctly."johnston@oscar.ccm.udel.edu (11/13/90)
In article <4bDgRsi00UhW81tEgt@andrew.cmu.edu>, gb2a+@andrew.cmu.edu (George J. Baxter) writes... >Hey gang-- > Is there a general program out there that will convert 1.2.# stacks >to the new 2.0 format?? FTP sites? (Sorry if this has already gone This is a menu option in HyperCard 2.0. It would probably make sense to exercise this option only on copies of the 1.2.# stacks. Bill Johnston; 38 Chambers St.; Newark, DE 19711; (302)368-1949 (johnston@oscar.ccm.udel.edu)
jk3t+@andrew.cmu.edu (Jonathan King) (11/13/90)
"George J. Baxter" <gb2a+@andrew.cmu.edu> writes: > Hey gang-- > Is there a general program out there that will convert 1.2.# stacks > to the new 2.0 format?? FTP sites? (Sorry if this has already gone > over the net, I've been off recently..) Um, You can use HC 2.0 to convert stacks into 2.0 format. You don't mean a program that mass converts, do you? (Actually, a stack like this could be hacked up, I suppose.) > gjb jking
kamins@kumr.UUCP (Scot Kamins) (11/14/90)
In article <4bDgRsi00UhW81tEgt@andrew.cmu.edu> gb2a+@andrew.cmu.edu (George J. Baxter) writes: > Is there a general program out there that will convert 1.2.# stacks >to the new 2.0 format? Just open the 1.2 stack with 2.0 running. Then choose "Convert Stack" in the Edit menu. -- Scot Kamins Co-author, "HyperTalk 2.0: The Book" (415) 282-8872 (with Dan Winkler) 671 28th Street San Francisco 94131 uunet!hoptoad!kumr!kamins kamins@wet.UUCP
kamins@kumr.UUCP (Scot Kamins) (11/14/90)
In article <245@kumr.UUCP> kamins@kumr.UUCP (Scot Kamins) writes: > >Just open the 1.2 stack with 2.0 running. Then choose "Convert Stack" in >the Edit menu. > ^^^^ Oops!!! I meant "File" menu. Sorry! -- Scot Kamins Co-author, "HyperTalk 2.0: The Book" (415) 282-8872 (with Dan Winkler) 671 28th Street San Francisco 94131 uunet!hoptoad!kumr!kamins kamins@wet.UUCP