karl@grebyn.com (Karl Nyberg) (03/18/89)
Reply-to: karl@grebyn.com (Karl Nyberg) I just got loaned a vr260 and have not had a lot of luck with it. Although I was able to get a kernel built that would recognize its existence as the system console, the TK50 drive no longer works. When I boot the previous kernel (which displays partly on the vr260 & partly on the vt100 as the system console) everything works fine (no vr260, but I do get a TK50). I don't touch any hardware, just change the kernel. Here's the line I added, straight from the GENERIC conf file. device qv0 at uba0 csr 0177200 flags 0x0f vector qvkint qvvint I've tried moving the physical location of the boards around in the backplane with the same negative results. Any thoughts? (This is Virginia where this type of cohabitation may still be against the blue laws... :-) ) Thanks. -- Karl --