steved@longs.LANCE.ColoState.Edu (Steve Dempsey) (11/29/89)
Running SLIP from VS2000<->VS2000 (Ultrix 3.1) at 2400 baud works fine.
Drop it to 1200 baud and the master hangs up right after the connection
is established. Using a serial line analyzer shows exactly the same data
being transferred at both speeds. I've tried different modems at both ends
to no avail. I'd use 2400 baud, but only have a 1200 modem for the long
term. Anyone seen this poblem?
Steve Dempsey, Center for Computer Assisted Engineering
Colorado State University, Fort Collins, CO 80523 +1 303 491 0630
INET: steved@longs.LANCE.ColoState.Edu, dempsey@handel.CS.ColoState.Edu
UUCP: boulder!ccncsu!longs.LANCE.ColoState.Edu!steved, ...!ncar!handel!dempsey