ab@cathedral.cerc.wvu.wvnet.edu (Alan Butcher) (03/19/90)
SYSTEMS: VAXserver 3900 with ULTRIX-32 V3.0 hostname: a YPSLAVE to sun system
SUN 4/260 with SUNOS 4.0.3 hostname: h YPMASTER
Both are NFS servers and clients, there are no known problem with the
mounts from the Ultrix machine to the SUN machine.
PROBLEM 1)
I am able to mount files systems on the Ultrix machine from the Sun
machine at boot time from the standard rc.local file with no error, but
any attempt to access the files systems results in the following error
NFS geattr failed for server a: RPC: Authentication error
PROBLEM 2)
If I attempt to mount the file system after boot is complete I get the
following error
mount a:/usr00 server not responding: RPC: Authentication error; why = Invalid client credential
mount: giving up on:
/mnt
QUESTIONS:
1) Anyone have a solution? (I HOPE FOR AN EASY FIX)
2) What are the causes of RPC authentication error
3) Any suggestions on an approach to the problem, I have tryed most everything.
Alan Butcher
ab@cerc.wvu.wvnet.edutinle@aimt.UU.NET (Tin Le) (03/21/90)
In article <426@cerc.wvu.wvnet.edu.edu> ab@cathedral.cerc.wvu.wvnet.edu (Alan Butcher) writes:
]
]SYSTEMS: VAXserver 3900 with ULTRIX-32 V3.0 hostname: a YPSLAVE to sun system
] SUN 4/260 with SUNOS 4.0.3 hostname: h YPMASTER
]
]Both are NFS servers and clients, there are no known problem with the
]mounts from the Ultrix machine to the SUN machine.
]
]PROBLEM 1)
]
]I am able to mount files systems on the Ultrix machine from the Sun
]machine at boot time from the standard rc.local file with no error, but
]any attempt to access the files systems results in the following error
]
]NFS geattr failed for server a: RPC: Authentication error
]
]PROBLEM 2)
]
]If I attempt to mount the file system after boot is complete I get the
]following error
]
]mount a:/usr00 server not responding: RPC: Authentication error; why = Invalid client credential
]mount: giving up on:
] /mnt
]
]QUESTIONS:
]1) Anyone have a solution? (I HOPE FOR AN EASY FIX)
]2) What are the causes of RPC authentication error
]3) Any suggestions on an approach to the problem, I have tryed most everything.
]
Here are some suggestions, it has been a while since I run into this.
Check to see if the Sun 4 is running with secure RPC/NFS. I used to
run into this kind of problems when I managed a Sun386i network running
SunOS 4.0.0 (can you say beta? thought you could :^>).
Look for the keyserv process on the Sun 4. You should turn it off
because as far as I know, DEC does not have secure RPC/NFS. Comment
out the line that starts keyserv up in /etc/rc and reboot.
The problem here is that the Sun 4 is asking your VAX for a key (look
in /etc/publickey on the Sun) and the VAX doesn't have it.
Also check your /etc/exports file and make sure that the filesystems
you want to mount on Ultrix side has the "root=Ultrix_host_name"
parm.
I have a VAXstation 3100 and a Sun 4/110 on my network without any
trouble mounting NFS filesys between them.
The problem with the 386i (actually SunOS 4.0.0) was that the publickey
file get out of sync between slaves/master servers, and clients.
-- Tin Le
--
Tin Le | UUCP: {wyse, claris, uunet}!aimt!tinle
Sr. Software Engineer | Internet: tinle@aimt.uu.net
AIM Technology | XBBS (408)-739-1520 19.2K Telebit+
Santa Clara, CA | Public Usenet access