karrer@ethz.UUCP (Andreas Karrer) (09/13/90)
We have purchased an AVIV AB 8202 dual Exabyte system for our DECsystem 5840. This device pretends to be a 2 TU81-E tapes (you can also connect a real TU81 to it) and connects tru a DEC KLESI-B BI-bus adapter to the BI bus of the 5840. Upon booting, the 5840 says: klesib at vaxbie node 3 failed to initialize! (the KLESI-B is in BI slot "node" 3) but the klesi-b's self control LED's are on. In fact, we had the board checked by DEC service. The AVIV manual is not much of a help, since it't basically written for VMS people. Anybody got similar problems? ----- Andi Karrer, Communication Systems, ETH Zuerich, Switzerland