jeremym@syma.sussex.ac.uk (Jeremy Maris) (10/26/90)
I'm having trouble making this work with an Exabyte. SHOW QBUS sees it OK and I've configured the kernel to support it as below controller uda0 at uba? controller uq0 at uda0 csr 0172150 vector uqintr disk ra1 at uq0 drive 0 controller klesiu1 at uba0 controller uq17 at klesiu1 csr 0176404 vector uqintr tape tms1 at uq17 drive 0 On boot, the controller doesn't configure and the exabyte isn't seen. Can anyone confirm that the Dilog SQ3703A works with RISC Ultrix ? By the way, we also have a CMD disk controller, which works fine with a Wren VII. Thanks, Jeremy Maris,Experimental Psychology,University of Sussex,Brighton,England. Janet: jeremym@uk.ac.sussex.syma Nsfnet: jeremym@syma.sussex.ac.uk Bitnet: jeremym%sussex.syma@ukacrl.bitnet UUCP: ...ukc!syma!jeremym
GEOMAGIC@kcgl1.eng.ohio-state.edu (Daniel OConnell) (10/30/90)
>Can anyone confirm that the Dilog SQ3703A works with RISC Ultrix ?
We have a Dilog SQ3726A which works fine with RISC Ultrix (3.1C) in
a 5400 with 3 Wren V's and one Wren VII (running in differential mode).
Dan O'Connell
geomagic@kcgl1.eng.ohio-state.edu VMS
geomagic@geo1s.mps.ohio-state.edu Ultrix