fnddr@acad3.fai.alaska.edu (Rice Don D) (11/02/90)
After a great amount of fooling around, I've got the HP drive running on a DS5000/Ultrix 4.0. When it was connected, the Ultrix boot would always die after printing: SCSI bus 0: command aborted (#0), ID = 1, cmd = 0x48 SCSI bus 0: resetting bus (#2) I finally figured out that the 0x48 command it was complaining about was a "pseudo-opcode" to start or stop the unit (/sys/io/scsi/mips/scsivar.h) and eliminating the SCSI_STARTUNIT flag from the drive's description in scsi_data.c allows the system to boot up with the drive. Based on conversations with other HP drive owners, I think firmware was revised to deal with this opcode but I've got an older revision (9026). After making a new filesystem on the A partition, I tried using chpt -a to load the partition table that I had put in scsi_data.c, for the drive. However, chpt -q showed the table: partition bottom top size overlap a 0 32767 32768 b,c,d,e,f,g,h b 0 0 0 a,c,d,e,f,g,h c 0 1956863 1956864 a,b,d,e,f,g,h d 0 0 0 a,b,c,e,f,g,h e 0 0 0 a,b,c,d,f,g,h f 0 0 0 a,b,c,d.e,g,h g 0 0 0 a,b,c,d,e,f,h h 0 0 0 a,b,c,d,e,f,g Questions: 1) This isn't the partition table I put into "sz_rz49_sizes"...why not, and where is this one coming from? It isn't the generic sz_rzxx_sizes, and during boot this drive, rz1, was correctly shown as being an RZ49, my bogus drive type. 2) Where is the 1956864 sector size coming from? The drive data book says it has 1994720 sectors total, 1953792 sectors after formatting. I'd like to know where the other 3072 sectors reported about are coming from. Anyway, I made filesystems, mounted them, loaded lots of stuff on them, and it seems to be behaving. I've got a nagging suspicion that I'll regret using the 1956864 figure in repartitioning the drive, rather than the smaller total given in the manual. If anyone has any words of wisdom to share, I'd like to hear them. Thanks, Don Rice Internet: fnddr@acad3.fai.alaska.edu Geophysical Institute E-mail: fnddr@alaska.bitnet University of Alaska Phone: (907) 474-7569 Fairbanks, AK 99775 Loran: 64.86N 212.16E