durham@w2xo.PGH.PA.US (Jim Durham) (11/08/90)
I have been trying without avail to get a manual for an Aviv CC-900 serial board. Many calls to Aviv haven't produced a manual yet, and I'm getting desperate! Does anyone know anything about this board? It is an 8 port serial card that is supposed to be a DZV work-alike. It *does* work with the DZ driver, but apparently overruns at anything over 600 baud. It is stamped with "SDZV" as well as 'CC-900' . The switches on the card are the same as a DZV (csr and interrupt vector), but there are also some extra switches that the DZV does not have marked 'm2', 't1' and a 3 pole dip switch marked 'p1 p2 p3' . Any help *greatly* appreciated... Thanks, Jim Durham (durham@w2xo.pgh.pa.us | jcd@cs.pitt.edu) -- Jim Durham internet: durham@w2xo.pgh.pa.us ham packet radio: jcd@cs.pitt.edu w2xo@w2xo.#wpa.pa.usa.na