daniel@synchrods.COM (Daniel Senderowicz) (11/10/90)
I was wondering if it is possible to change the dialing sequences for different calls in the L.sys file. Some sites have modems that require different protocols, however I only see one ACU option. Any ideas? Thanks, Dan.
grr@cbmvax.commodore.com (George Robbins) (11/11/90)
In article <39497@ucbvax.BERKELEY.EDU> daniel@synchrods.COM (Daniel Senderowicz) writes: > I was wondering if it is possible to change the dialing > sequences for different calls in the L.sys file. Some sites have > modems that require different protocols, however I only see one > ACU option. Any ideas? Thanks, You can have multiple lines for a given system in the L.sys file use a prefix on the "speed" to select different lines in the L-devices file, which specify different modem descriptions in the acucap file: L.sys: xygate Any,5 ACU tb9600 12223333 "" P_ZERO "" \d\d\r\r\c ogin:--ogin:-BREAK-ogin: ... xygate Any,5 ACU v9600 12223333 "" P_ZERO "" \d\d\r\r\c ogin:--ogin:-BREAK-ogin: ... L-devices: ACU tty15 tty15 v9600 v32 ACU tty15 tty15 tb9600 pep acucap: pep|tbpep|trailblazer-pep|Telebit Trailblazer in pep mode S50=255:\ :cr:hu:ls:re:ss=AAATZ\r\d:sr=OK:sd#250000:di=A\dA\dATS50=255DT:dt=\r:\ :dd#50000:fd#50:rs=,:os=CONNECT:ds=\d+++\dATZ\r:ab=\d+++\dATZ\r: v32|trailblazer-V.32|Telebit Trailblazer in V.32 mode S50=6:\ :cr:hu:ls:re:ss=AAATZ\r\d:sr=OK:sd#250000:\ :di=A\dA\dATS50=6S58=0S68=0DT:dt=\r:\ :dd#50000:fd#50:rs=,:os=CONNECT:ds=\d+++\dATZ\r:ab=\d+++\dATZ\r: If this all seems confusing, just keep in mind that not all the fields in the uucp control files are limited to their apparent meaning... -- George Robbins - now working for, uucp: {uunet|pyramid|rutgers}!cbmvax!grr but no way officially representing: domain: grr@cbmvax.commodore.com Commodore, Engineering Department phone: 215-431-9349 (only by moonlite)