jem@mhinfo.UUCP (John McCormack) (11/20/90)
I have established a direct link between a Decstation 3100 running 4.0 and an SCO Unix machine. I would like to be able to use "cu" to login into each of these machines. The link is setup to run at 9600 baud and 8 bits. I am not having any problems using "cu" from the Ultrix machine to the SCO machine. However, when initiating a login from the SCO machine, I have a problem. My problem starts just after getting "connected" and typing the username. After hitting the <RETURN> I recieve a constant flow of data to my terminal which I must break out of using "~.". I would expect to see the password prompt normally. Does anyone have any suggestions as to what might be causing this problem? Thanks, John