douglas@dekalb.UUCP (Douglas B. Jones) (02/27/91)
I recently downloaded ~gatekeeper.dec.com/pub/X11/contrib/xglobe.tar.Z.
After uncompressing it and taring it, I found out that it requires MOTIF.
I am currently on a DS3100 running ULTRIX 4.0 with DECWINDOWS. The makefile
requires (this is from memory) the files in /usr/lib/DXM, /usr/lib/XM, and
the same in /usr/include. I take these to mean X MOTIF and DEC X MOTIF. I
do not have this on my current release and understand that this is suppose
to be in with the next major release. My question is:
1) Is there a version of xglobe that will run on what I have (as above)
(I saw this program running on a MVII/GPX and DS3100 at the DEC ACTS
center in Atlanta in the last year or so (pre-ULTRIX 4.0).), or
2) is there another route I should be taking.
Any help would be greatly appreciated.
Thanks,
Douglas
--
Doulas B. Jones douglas@dekalb
Academic Computer Center or gatech!dekalb!douglas
DeKalb College Config: MV3600/ULTRIX 3.0
555 N. Indian Creek Drive/Clarkston, Ga. 30021 (404) 299-4233klee@wsl.dec.com (Ken Lee) (02/28/91)
In article <1222@dekalb.UUCP>, douglas@dekalb.UUCP (Douglas B. Jones) writes: |> |> I recently downloaded ~gatekeeper.dec.com/pub/X11/contrib/xglobe.tar.Z. |> |> After uncompressing it and taring it, I found out that it requires MOTIF. |> |> I am currently on a DS3100 running ULTRIX 4.0 with DECWINDOWS. The makefile |> requires (this is from memory) the files in /usr/lib/DXM, /usr/lib/XM, and |> the same in /usr/include. I take these to mean X MOTIF and DEC X MOTIF. I |> do not have this on my current release and understand that this is suppose |> to be in with the next major release. Motif is currently available as a layered product for Ultrix. xglobe works properly with the layered product. Porting it to other widget sets should be straight forward, if you understand how to write widgets. -- Ken Lee DEC Western Software Laboratory, Palo Alto, Calif. Internet: klee@wsl.dec.com uucp: uunet!decwrl!klee