flt@madison.INEL.GOV (Logan Thomas) (07/17/90)
Hi,
I am tring to build Gnu emacs on a Dec 3100/Risc, afterwards I
can move on to other thing. However I am having a hard time
with config.h, yet I know it's possible. Can one of you gurus
please post the config.h file or mail me a copy.
Thanks in advance..........................................
------------------------------------------------------------------------------
F. Logan Thomas UUCP: ...!{uiucuxc,ucbvax!ucdavis}!egg-id!flt
Idaho National Engineering Lab. INTERNET: flt@egg-id.INEL.GOV
POB 1625 M.S. 2603 Phone: (208) 526-9081
Idaho Falls, Id. 83415 FAX: (208) 526-9936
------------------------------------------------------------------------------
Neither the United States Government nor the Idaho National
Engineering Laboratory nor any of their employees, makes any warranty,
expressed or implied, or assumes any legal liability or responsibility
for the accuracy, completeness, or usefulness of any information,
product, or process disclosed, or represents that its use would not
infringe privately owned rights. Reference herein to any specific
commercial products, process, or service by trade name, trademark
manufacturer, or otherwise, does not necessarily constitute or imply
its endorsement, recommendation, or favoring by the United States
Government or the Idaho National Engineering Laboratory. The views and
opinions of authors expressed herein do not necessarily state or reflect
those of the United States Government nor the Idaho National Engineering
Laboratory, and shall not be used for advertising or product endorsement
purposes.iglesias@orion.oac.uci.edu (Mike Iglesias) (07/17/90)
In article <1990Jul16.215114.23157@inel.gov> flt@madison.INEL.GOV (Logan Thomas) writes: >Hi, > > I am tring to build Gnu emacs on a Dec 3100/Risc, afterwards I > can move on to other thing. However I am having a hard time > with config.h, yet I know it's possible. Can one of you gurus > please post the config.h file or mail me a copy. > > Thanks in advance.......................................... First, make sure you're using GNU Emacs v18.55. I don't remember the exact settings for config.h, but if you look in etc/MACHINES, you'll find the info you need. Mike Iglesias University of California, Irvine Internet: iglesias@orion.oac.uci.edu BITNET: iglesias@uci uucp: ...!ucbvax!ucivax!iglesias
mellon@fenris.pa.dec.com (Ted Lemon) (07/21/90)
Your .signature is really long. On to the main subject, though. You can build GNU Emacs version 18.55 out of the box - the config file for the pmax is included. It's called m-pmax.h. _MelloN_
kjh@visual1.jhuapl.edu (Kenneth J. Heeres) (11/08/90)
Subject:DECwindows dxcardfiler Sender: news@aplcen.apl.jhu.edu (USENET News System) Reply-To: kjh@visual1.jhuapl.edu (Kenneth J. Heeres) Organization: Johns Hopkins University Date: Wed, 7 Nov 90 15:09:44 GMT Is the format of the cardfile published anywhere. I want to add 2000 card stack, but I don't want to enter it by hand. thanks, ken
keinert@IASTATE.EDU (Keinert Fritz) (12/10/90)
Subject:Re: cc, ld -- math libraries on RISC ULTRIX Reply-To: keinert@IASTATE.EDU (Keinert Fritz) Organization: Iowa State University Followup-To:<1990Dec9.210422.16744@ux1.cso.uiuc.edu> Date: Mon Dec 10 14:22:06 1990 GMT In a previous posting, sudha@cs.uiuc.edu (Sudhakar Yerramareddy) asks > I am trying to call a fortran subroutine from a C program. I tried this > on the DS3100 and DS5000 running ULTRIX 4.0. I tried this, too, and the only way I can get it to work is with cc ... -lF77 -lI77 -lU77 -lm -lF77 libF77.a needs to be searched twice, the second time only for a symbol _sabort. Fritz Keinert phone: (515) 294-5128 Department of Mathematics fax: (515) 294-5454 Iowa State University e-mail: keinert@iastate.edu Ames, IA 50011
mconlon@holly.stat.ufl.edu (Mike Conlon) (01/18/91)
We have recently brought up X11R4 on our DECstation 3100 under Ultrix 4.1. We have a group of Xterminals, 1200's and 1000's and we would like their screens managed by xdm. We put entries in the Xservers file like: ilex:0 VT1200 foreign and sent a SIGHUP to xdm. It reset ilex's screen (went grey-- everything was gone). The Xterm was locked solid. The error messages in xdm-errors are shown below. error (pid 14887): Hung in XOpenDisplay(ilex:0), aborting error (pid 14887): server open failed for ilex:0, giving up What else needs to be done to get the X terminal ilex to accept the login screen and other X messages from the DECstation? Please mail to me and I will collect responses and post back a summary. -- Michael Conlon | Internet: mconlon@stat.ufl.edu Research Assistant Professor | BITNET : mconlon@nervm Division of Biostatistics | Phone : (904) 392-2823 Department of Statistics | US Mail : Box J212 JHMHC University of Florida | Gainesville FL 32610
gilk@desire.wright.edu (04/23/91)
Does anyone know of a program that will emulate the EDT editor from a VAX that runs on an Ultrix system? I am running a DECstation 5000/200 with Ultrix 4.1. Thank you. Robert H. Gilkey gilk@sdl.psych.wright.edu
grr@cbmvax.commodore.com (George Robbins) (04/25/91)
In article <1991Apr23.162053.3325@desire.wright.edu> gilk@desire.wright.edu writes: > Does anyone know of a program that will emulate the EDT editor from a VAX that > runs on an Ultrix system? I am running a DECstation 5000/200 with Ultrix 4.1. You can get and EDT emulator from Boston Business Systems or a TPU emulator from aSoft which will run EDT compatibility. See any unix magazine for adverts. -- George Robbins - now working for, uucp: {uunet|pyramid|rutgers}!cbmvax!grr but no way officially representing: domain: grr@cbmvax.commodore.com Commodore, Engineering Department phone: 215-431-9349 (only by moonlite)