lindsay@watnext.waterloo.edu (03/24/89)
From: Lindsay Patten <lindsay@watnext> Are the modules which fit onto the Niche NT1000 motherboard in fact INMOS modules? With Niche (seemingly) gone I would still like to fully populate my NT1000 any way possible. Can I just buy and plug in INMOS modules using appropriate pin connectors? Thanks, Lindsay --- Lindsay Patten Pattern Analysis & Machine Intelligence Group lindsay@watnext.waterloo.edu Department of Systems Design Engineering lindsay@watnext.uwaterloo.ca University of Waterloo {utai|decvax|uunet}!watmath!watnext!lindsay
davidb@titan.inmos.co.uk (David Boreham) (03/29/89)
Are INMOS modules and NEICHE modules (TRAMs) the same ? Well.... INMOS TRAMs are designed according to a publically available spec. (INMOS technical note number 29, get it from your local sales office). Neiche used the same pinout and electrical spec, however they made modules which are mechanically incompatible with the INMOS spec. (they are larger and use different pins). Since the INMOS modules are smaller and the pinouts are the same, INMOS TRAMs will work on the NT1000 board. Don't expect Neiche modules to fit all other motherboards. I hope this is of help. David Boreham, INMOS limited | davidb@inmos.co.uk or davidb@uk.co.inmos 1000 Aztec West, Almondsbury | ...!mcvax!ukc!inmos!davidb Bristol BS12 4SQ, UK | +44 454 616616