[comp.sys.transputer] Writing UNIX drivers for B008 boards

gunther@probitas.cs.utas.edu.au (Bernard Gunther) (01/29/91)

Dear Netters:

I don't have access to the Usenet newsgroups so I am taking advantage of a
friend's patience and generosity to do so.  PLEASE email me
(blian@nusdiscs.bitnet) and not him.  Do not post to the newsgroup!

I am very close to purchasing a MIPS Magnum 3000 as the UNIX platform for a
bunch of transputers TRAMS on a B008-compatible motherboard.  Both TRAMS
(T800-20/2MB) and motherboard (TBX10) are by Mark Ware Associates.  Of course,
by implication, the Magnum has an AT bus slot.  No DMA but that is not a real
loss given the way IBM crippled DMA on the AT bus (or so I'm told).

As far as I know, the MIPS/transputer combination is very rare.  It looks like
I have to write my own UNIX device driver to get host talking to motherboard's
C012 link interface.  If any one has already done this, I would very much
appreciate a copy of the source if possible.  An alternative would be for me to
get hold of source of a driver written for some other flavour of UNIX.

Incidentally, I would also welcome your experiences with Mark Ware stuff.
Recommendations of alternatives also gratefully accepted.

--bl


_______________________________________________________________________________
Benjamin Y H Lian                                  Email: blian@nusdiscs.bitnet
Dept of Information Systems & Computer Science     Tel: +65 - 7726277
National University of Singapore                   Fax: +65 - 7794580
Lower Kent Ridge Road
Singapore 0511
Republic of Singapore