[comp.doc] RFCs 1230, 1231 on IEEE 802.4 MIB, IEEE 802.5 MIB

jkrey@ISI.EDU (Joyce K. Reynolds) (05/24/91)

New Request for Comments are now available from the DDN Network
Information Center in the online library at FTP.NISC.SRI.COM.

	RFC 1230:

        Title:      IEEE 802.4 Token Bus MIB
	Author:     K. McCloghrie & R. Fox
	Mailbox:    kzm@hls.com, rfox@synoptics.com
	Pages:      23
	Characters: 51,810
	Obsoletes/Updates: none

		pathname: rfc/rfc1230.txt


This memo defines a MIB for the IEEE 802.4 Token Bus for use with the
SNMP protocol.  This memo is a product of the Transmission Working
Group of the Internet Engineering Task Force (IETF).  This RFC
specifies a Proposed Standard Protocol for the Internet community, and
requests discussion and suggestions for improvements.  Please refer to
the current edition of the "IAB Official Protocol Standards" for the
standardization state and status of this protocol.  Distribution of
this memo is unlimited.


        RFC 1231:

        Title:      IEEE 802.5 Token Ring MIB
	Author:     K. McCloghrie, R. Fox, & E. Decker
	Mailbox:    kzm@hls.com, rfox@synoptics.com, cire@cisco.com
	Pages:      23
	Characters: 52,252
	Obsoletes/Updates: none

		pathname: rfc/rfc1231.txt


This memo defines a MIB for 805.5 networks for use with the SNMP
protocol.  This memo is a product of the Transmission Working Group of
the Internet Engineering Task Force (IETF).  This RFC specifies a
Proposed Standard Protocol for the Internet community, and requests
discussion and suggestions for improvements.  Please refer to the
current edition of the "IAB Official Protocol Standards" for the
standardization state and status of this protocol.  Distribution of
this memo is unlimited.

RFCs can be obtained via FTP from FTP.NISC.SRI.COM, NIS.NSF.NET, or
NISC.JVNC.NET.

RFCs can be obtained via FTP from FTP.NISC.SRI.COM, with the pathname
rfc/rfcNNNN.txt (where "NNNN" refers to the number of the RFC).  Login
with FTP username "anonymous" and password "guest".

SRI also provides an automatic mail service for those sites which
cannot use FTP.  Address the request to MAIL-SERVER@NISC.SRI.COM and
in the body of the message indicate the RFC to be sent: "send rfcNNNN"
where NNNN is the RFC number.  Multiple requests may be included in
the same message.

To obtain RFCs from NIS.NSF.NET via FTP, login with username
"anonymous" and password "guest"; then connect to the RFC directory
("cd RFC").  The file name is of the form RFCnnnn.TXT-1 (where "nnnn"
refers to the number of the RFC).

The NIS also provides an automatic mail service for those sites which
cannot use FTP.  Address the request to NIS-INFO@NIS.NSF.NET and leave
the subject field of the message blank.  The first line of the text of
the message must be "SEND RFCnnnn.TXT-1", where nnnn is replaced by
the RFC number.

RFCs can also be obtained via FTP from NISC.JVNC.NET, with the
pathname rfc/RFCnnnn.TXT.v.Z (where "nnnn" refers to the number of the
RFC and "v" refers to the version number of the RFC).  Login with FTP
username "anonymous" and your e-mail address as your password.

JvNCnet also provides a mail service for those sites which cannot use
FTP.  Address the request to NISC@JVNC.NET and in the subject field of
the message indicate the RFC number, as in "Subject: RFC nnnn".

Requests for special distribution should be addressed to either the
author of the RFC in question, or to NIC@NIC.DDN.MIL.  Unless
specifically noted otherwise on the RFC itself, all RFCs are for
unlimited distribution.

Submissions for Requests for Comments should be sent to
POSTEL@ISI.EDU.  Please consult RFC 1111, "Instructions to RFC
Authors", for further information.

Requests to be added to or deleted from this distribution list should
be sent to RFC-REQUEST@NIC.DDN.MIL.


Joyce K. Reynolds
USC/Information Sciences Institute