day@grand.UUCP (Dave Yost) (04/12/89)
I have a LW+ (firmware 38.0) hooked up to a Sun through the 25-pin serial interface, with the selector switch set to 9600 (operating at 19200 baud). Now, if I hook up a Mac to the Appletalk port (using Phone-Net 2-wire adaptors), the yellow light flashes when there is nothing being sent to the printer from either source. Printing via the serial line does seem to work OK even so. Does anyone know if this behavior is different with the newer (47.0?) LW+ firmware? --dave