ehrlich@psuvax1.cs.psu.edu (Dan Ehrlich) (08/20/90)
We are looking at getting a Versatec electrostatic color plotter and would like to be able to get Color PostScript output on it. Does anyone know of any software that will take a Color PostScript file and convert it to the raster format that the Versatec want? Also, if anyone has any suggestions as to other electrostatic color plotters that can be made to support Color PostScript please let me know. Please e-mail to me and I will summarize back to these groups. -- Dan Ehrlich <ehrlich@cs.psu.edu>/Voice: +1 814 863 1142/FAX: +1 814 865 3176 -- Dan Ehrlich <ehrlich@cs.psu.edu>/Voice: +1 814 863 1142/FAX: +1 814 865 3176
jjwcmp@ultb.isc.rit.edu (Jeff Wasilko) (08/22/90)
In article <F7fd=.r1@cs.psu.edu> ehrlich@psuvax1.cs.psu.edu (Dan Ehrlich) writes: >We are looking at getting a Versatec electrostatic color plotter and >would like to be able to get Color PostScript output on it. Does >anyone know of any software that will take a Color PostScript file and >convert it to the raster format that the Versatec want? > >Also, if anyone has any suggestions as to other electrostatic color I saw a Versatec plotter running @ MacWorld (from PostScript), and the images were great! The company that makes the interface is: National Reprogrpahics Cadgraphics Division 44 West 18th Street NY, NY 10011 212-366-7073 They use a PC-based RIP, I think it was the CAI one, but I could be wrong. It supports 400dpi, and 42"x12 feet images. Jeff -- | RIT VAX/VMS Systems: | Jeff Wasilko | RIT Ultrix Systems: | |BITNET: jjwcmp@ritvax +----------------------+ INET:jjwcmp@ultb.isc.rit.edu| |INTERNET: jjwcmp@ritvax.rit.edu |____UUCP:jjwcmp@ultb.UUCP____| |'claimer: I speak only for myself. Opinions expressed are NOT those of RIT.|