lilianstrom@fndcd.fnal.fov (06/27/91)
I have a QMS 2220 PS Printer on evaluation (for its 11X17 capibility) and it is currently set to feed from the bottom tray (11X17) only. The top tray is 8 1/2X11 and I'd like to select from that tray on demand. The QMS manual states the following commands for selecting the papertray; paperfamily 'int' US or Metric sizes papertray 'int' select which tray. 1 for lower, 2 for upper and 3 for the auxillary feed. 'int' setpapertray sets the papertray and image area according to paper size. I've tried including a 2 setpapertray in my file with no luck. Can anyone advise me on what I'm doing wrong and/or where to place the papertray selection command. I'm a novice at PostScript so I'll apoligize in advance if I bore you. Thanks, al Al Lilianstrom Fermi National Accelerator Laboratory Batavia, Illinois lilianstrom@fnal.fnal.gov lilianstrom@fnal.bitnet