lwall@jato.Jpl.Nasa.Gov (Larry Wall) (09/03/89)
#! /bin/sh
# Make a new directory for the perl sources, cd to it, and run kits 1
# thru 23 through sh. When all 23 kits have been run, read README.
echo "This is perl 3.0 kit 3 (of 23). If kit 3 is complete, the line"
echo '"'"End of kit 3 (of 23)"'" will echo at the end.'
echo ""
export PATH || (echo "You didn't use sh, you clunch." ; kill $$)
mkdir t 2>/dev/null
echo Extracting Configure
sed >Configure <<'!STUFFY!FUNK!' -e 's/X//'
X#! /bin/sh
X#
X# If these # comments don't work, trim them. Don't worry about any other
X# shell scripts, Configure will trim # comments from them for you.
X#
X# (If you are trying to port this package to a machine without sh, I would
X# suggest you cut out the prototypical config.h from the end of Configure
X# and edit it to reflect your system. Some packages may include samples
X# of config.h for certain machines, so you might look for one of those.)
X#
X# $Header: Head.U,v 2.0 88/06/28 23:13:13 lwall Locked $
X#
X# Yes, you may rip this off to use in other distribution packages.
X# (Note: this Configure script was generated automatically. Rather than
X# working with this copy of Configure, you may wish to get metaconfig.)
X
X: sanity checks
XPATH='.:/bin:/usr/bin:/usr/local/bin:/usr/ucb:/usr/local:/usr/lbin:/etc:/usr/new:/usr/new/bin:/usr/nbin'
Xexport PATH || (echo "OOPS, this isn't sh. Desperation time. I will feed myself to sh."; sh $0; kill $$)
X
Xif test ! -t 0; then
X echo "Say 'sh Configure', not 'sh <Configure'"
X exit 1
Xfi
X
X(alias) >/dev/null 2>&1 && \
X echo "(I see you are using the Korn shell. Some ksh's blow up on Configure," && \
X echo "especially on exotic machines. If yours does, try the Bourne shell instead.)"
X
Xif test ! -d ../UU; then
X if test ! -d UU; then
X mkdir UU
X fi
X cd UU
Xfi
X
Xcase "$1" in
X-d) shift; fastread='yes';;
Xesac
X
Xd_eunice=''
Xeunicefix=''
Xdefine=''
Xloclist=''
Xexpr=''
Xsed=''
Xecho=''
Xcat=''
Xrm=''
Xmv=''
Xcp=''
Xtail=''
Xtr=''
Xmkdir=''
Xsort=''
Xuniq=''
Xgrep=''
Xtrylist=''
Xtest=''
Xinews=''
Xegrep=''
Xmore=''
Xpg=''
XMcc=''
Xvi=''
Xmailx=''
Xmail=''
Xcpp=''
Xperl=''
XLog=''
XHeader=''
Xbin=''
Xbyteorder=''
Xcontains=''
Xcppstdin=''
Xcppminus=''
Xd_bcopy=''
Xd_charsprf=''
Xd_crypt=''
Xd_dosuid=''
Xd_fchmod=''
Xd_fchown=''
Xd_fcntl=''
Xd_flock=''
Xd_getgrps=''
Xd_getpgrp=''
Xd_getprior=''
Xd_htonl=''
Xd_index=''
Xd_ioctl=''
Xd_killpg=''
Xd_memcpy=''
Xd_mkdir=''
Xd_ndbm=''
Xd_odbm=''
Xd_rename=''
Xd_rmdir=''
Xd_setegid=''
Xd_seteuid=''
Xd_setpgrp=''
Xd_setprior=''
Xd_setregid=''
Xd_setreuid=''
Xd_setrgid=''
Xd_setruid=''
Xd_socket=''
Xd_oldsock=''
Xsocketlib=''
Xsockethdr=''
Xd_statblks=''
Xd_stdstdio=''
Xd_strctcpy=''
Xd_symlink=''
Xd_tminsys=''
Xi_systime=''
Xd_varargs=''
Xd_vfork=''
Xd_voidsig=''
Xd_vprintf=''
Xgidtype=''
Xintsize=''
Xlibc=''
Xlibdbm=''
Xlibnm=''
Xmallocsrc=''
Xmallocobj=''
Xusemymalloc=''
Xmansrc=''
Xmanext=''
Xmodels=''
Xsplit=''
Xsmall=''
Xmedium=''
Xlarge=''
Xhuge=''
Xccflags=''
Xldflags=''
Xcc=''
Xn=''
Xc=''
Xpackage=''
Xrandbits=''
Xsig_name=''
Xspitshell=''
Xshsharp=''
Xsharpbang=''
Xstartsh=''
Xstdchar=''
Xuidtype=''
Xvoidflags=''
Xdefvoidused=''
Xlib=''
Xprivlib=''
XCONFIG=''
X: set package name
Xpackage=perl
X
Xecho " "
Xecho "Beginning of configuration questions for $package kit."
X: Eunice requires " " instead of "", can you believe it
Xecho " "
X
Xdefine='define'
Xundef='undef'
Xlibpth='/usr/lib /usr/local/lib /lib /usr/lib/large /lib/large /usr/lib/small /lib/small'
Xsmallmach='pdp11 i8086 z8000 i80286 iAPX286'
Xrmlist='kit[1-9]isdone kit[1-9][0-9]isdone'
Xtrap 'echo " "; rm -f $rmlist; exit 1' 1 2 3
X
X: We must find out about Eunice early
Xeunicefix=':'
Xif test -f /etc/unixtovms; then
X eunicefix=/etc/unixtovms
Xfi
Xif test -f /etc/unixtovms.exe; then
X eunicefix=/etc/unixtovms.exe
Xfi
X
X: Now test for existence of everything in MANIFEST
X
Xecho "First let's make sure your kit is complete. Checking..."
X(cd ..; cat `awk '{print $1}' MANIFEST` >/dev/null || kill $$)
Xecho " "
X
Xattrlist="mc68000 sun gcos unix ibm gimpel interdata tss os mert pyr"
Xattrlist="$attrlist vax pdp11 i8086 z8000 u3b2 u3b5 u3b20 u3b200"
Xattrlist="$attrlist hpux hp9000s300 hp9000s500 hp9000s800"
Xattrlist="$attrlist ns32000 ns16000 iAPX286 mc300 mc500 mc700 sparc"
Xattrlist="$attrlist nsc32000 sinix xenix venix posix ansi M_XENIX"
Xattrlist="$attrlist $mc68k __STDC__ UTS M_I8086 M_I186 M_I286 M_I386"
Xattrlist="$attrlist i186"
Xpth="/usr/ucb /bin /usr/bin /usr/local /usr/local/bin /usr/lbin /etc /usr/lib /lib /usr/local/lib"
Xd_newshome="/usr/NeWS"
Xdefvoidused=7
X
X: some greps do not return status, grrr.
Xecho "grimblepritz" >grimble
Xif grep blurfldyick grimble >/dev/null 2>&1 ; then
X contains=contains
Xelif grep grimblepritz grimble >/dev/null 2>&1 ; then
X contains=grep
Xelse
X contains=contains
Xfi
Xrm -f grimble
X: the following should work in any shell
Xcase "$contains" in
Xcontains*)
X echo " "
X echo "AGH! Grep doesn't return a status. Attempting remedial action."
X cat >contains <<'EOSS'
Xgrep "$1" "$2" >.greptmp && cat .greptmp && test -s .greptmp
XEOSS
Xchmod +x contains
Xesac
X
X: first determine how to suppress newline on echo command
Xecho "Checking echo to see how to suppress newlines..."
X(echo "hi there\c" ; echo " ") >.echotmp
Xif $contains c .echotmp >/dev/null 2>&1 ; then
X echo "...using -n."
X n='-n'
X c=''
Xelse
X cat <<'EOM'
X...using \c
XEOM
X n=''
X c='\c'
Xfi
Xecho $n "Type carriage return to continue. Your cursor should be here-->$c"
Xread ans
Xrm -f .echotmp
X
X: now set up to do reads with possible shell escape and default assignment
Xcat <<EOSC >myread
Xcase "\$fastread" in
Xyes) ans=''; echo " " ;;
X*) ans='!';;
Xesac
Xwhile expr "X\$ans" : "X!" >/dev/null; do
X read ans
X case "\$ans" in
X !)
X sh
X echo " "
X echo $n "\$rp $c"
X ;;
X !*)
X set \`expr "X\$ans" : "X!\(.*\)\$"\`
X sh -c "\$*"
X echo " "
X echo $n "\$rp $c"
X ;;
X esac
Xdone
Xrp='Your answer:'
Xcase "\$ans" in
X'') ans="\$dflt";;
Xesac
XEOSC
X
X: general instructions
Xcat <<EOH
X
XThis installation shell script will examine your system and ask you questions
Xto determine how the $package package should be installed. If you get stuck
Xon a question, you may use a ! shell escape to start a subshell or execute
Xa command. Many of the questions will have default answers in square
Xbrackets--typing carriage return will give you the default.
X
XOn some of the questions which ask for file or directory names you are
Xallowed to use the ~name construct to specify the login directory belonging
Xto "name", even if you don't have a shell which knows about that. Questions
Xwhere this is allowed will be marked "(~name ok)".
X
XEOH
Xrp="[Type carriage return to continue]"
Xecho $n "$rp $c"
X. myread
Xcat <<EOH
X
XMuch effort has been expended to ensure that this shell script will run
Xon any Unix system. If despite that it blows up on you, your best bet is
Xto edit Configure and run it again. Also, let me (lwall@jpl-devvax.jpl.nasa.gov)
Xknow how I blew it. If you can't run Configure for some reason, you'll have
Xto generate a config.sh file by hand.
X
XThis installation script affects things in two ways: 1) it may do direct
Xvariable substitutions on some of the files included in this kit, and
X2) it builds a config.h file for inclusion in C programs. You may edit
Xany of these files as the need arises after running this script.
X
XIf you make a mistake on a question, there is no easy way to back up to it
Xcurrently. The easiest thing to do is to edit config.sh and rerun all the
XSH files. Configure will offer to let you do this before it runs the SH files.
X
XEOH
Xrp="[Type carriage return to continue]"
Xecho $n "$rp $c"
X. myread
X
X: get old answers, if there is a config file out there
Xif test -f ../config.sh; then
X echo " "
X dflt=y
X rp="I see a config.sh file. Did Configure make it on THIS system? [$dflt]"
X echo $n "$rp $c"
X . myread
X case "$ans" in
X n*) echo "OK, I'll ignore it.";;
X *) echo "Fetching default answers from your old config.sh file..."
X tmp="$n"
X ans="$c"
X . ../config.sh
X n="$tmp"
X c="$ans"
X ;;
X esac
Xfi
X
X: find out where common programs are
Xecho " "
Xecho "Locating common programs..."
Xcat <<EOSC >loc
X$startsh
Xcase \$# in
X0) exit 1;;
Xesac
Xthing=\$1
Xshift
Xdflt=\$1
Xshift
Xfor dir in \$*; do
X case "\$thing" in
X .)
X if test -d \$dir/\$thing; then
X echo \$dir
X exit 0
X fi
X ;;
X *)
X if test -f \$dir/\$thing; then
X echo \$dir/\$thing
X exit 0
X elif test -f \$dir/\$thing.exe; then
X : on Eunice apparently
X echo \$dir/\$thing
X exit 0
X fi
X ;;
X esac
Xdone
Xecho \$dflt
Xexit 1
XEOSC
Xchmod +x loc
X$eunicefix loc
Xloclist="
Xexpr
Xsed
Xecho
Xcat
Xrm
Xmv
Xcp
Xtr
Xmkdir
Xsort
Xuniq
Xgrep
X"
Xtrylist="
Xtest
Xegrep
XMcc
Xcpp
X"
Xfor file in $loclist; do
X xxx=`loc $file $file $pth`
X eval $file=$xxx
X eval _$file=$xxx
X case "$xxx" in
X /*)
X echo $file is in $xxx.
X ;;
X *)
X echo "I don't know where $file is. I hope it's in everyone's PATH."
X ;;
X esac
Xdone
Xecho " "
Xecho "Don't worry if any of the following aren't found..."
Xans=offhand
Xfor file in $trylist; do
X xxx=`loc $file $file $pth`
X eval $file=$xxx
X eval _$file=$xxx
X case "$xxx" in
X /*)
X echo $file is in $xxx.
X ;;
X *)
X echo "I don't see $file out there, $ans."
X ans=either
X ;;
X esac
Xdone
Xcase "$egrep" in
Xegrep)
X echo "Substituting grep for egrep."
X egrep=$grep
X ;;
Xesac
Xcase "$test" in
Xtest)
X echo "Hopefully test is built into your sh."
X ;;
X/bin/test)
X if sh -c "PATH= test true" >/dev/null 2>&1; then
X echo "Using the test built into your sh."
X test=test
X fi
X ;;
X*)
X test=test
X ;;
Xesac
Xcase "$echo" in
Xecho)
X echo "Hopefully echo is built into your sh."
X ;;
X/bin/echo)
X echo " "
X echo "Checking compatibility between /bin/echo and builtin echo (if any)..."
X $echo $n "hi there$c" >foo1
X echo $n "hi there$c" >foo2
X if cmp foo1 foo2 >/dev/null 2>&1; then
X echo "They are compatible. In fact, they may be identical."
X else
X case "$n" in
X '-n') n='' c='\c' ans='\c' ;;
X *) n='-n' c='' ans='-n' ;;
X esac
X cat <<FOO
XThey are not compatible! You are probably running ksh on a non-USG system.
XI'll have to use /bin/echo instead of the builtin, since Bourne shell doesn't
Xhave echo built in and we may have to run some Bourne shell scripts. That
Xmeans I'll have to use $ans to suppress newlines now. Life is ridiculous.
X
XFOO
X rp="Your cursor should be here-->"
X $echo $n "$rp$c"
X . myread
X fi
X $rm -f foo1 foo2
X ;;
X*)
X : cross your fingers
X echo=echo
X ;;
Xesac
Xrmlist="$rmlist loc"
X
X: get list of predefined functions in a handy place
Xecho " "
Xif test -f /lib/libc.a; then
X echo "Your C library is in /lib/libc.a. You're normal."
X libc=/lib/libc.a
Xelse
X ans=`loc libc.a blurfl/dyick $libpth`
X if test ! -f $ans; then
X ans=`loc libc blurfl/dyick $libpth`
X fi
X if test ! -f $ans; then
X ans=`loc clib blurfl/dyick $libpth`
X fi
X if test -f $ans; then
X echo "Your C library is in $ans, of all places."
X libc=$ans
X else
X if test -f "$libc"; then
X echo "Your C library is in $libc, like you said before."
X else
X cat <<EOM
X
XI can't seem to find your C library. I've looked in the following places:
X
X $libpth
X
XNone of these seems to contain your C library. What is the full name
XEOM
X dflt=None
X $echo $n "of your C library? $c"
X rp='C library full name?'
X . myread
X libc="$ans"
X fi
X fi
Xfi
Xecho " "
X$echo $n "Extracting names from $libc for later perusal...$c"
Xnm $libc 2>/dev/null >libc.tmp
Xsed -n -e 's/^.* [AT] *_//p' -e 's/^.* [AT] *//p' <libc.tmp >libc.list
Xif $contains '^printf$' libc.list >/dev/null 2>&1; then
X echo "done"
Xelse
X sed -n -e 's/^.* D _//p' -e 's/^.* D //p' <libc.tmp >libc.list
X $contains '^printf$' libc.list >/dev/null 2>&1 || \
X sed -n -e 's/^_//' \
X -e 's/^\([a-zA-Z_0-9]*\).*xtern.*text.*/\1/p' <libc.tmp >libc.list
X if $contains '^printf$' libc.list >/dev/null 2>&1; then
X echo "done"
X else
X echo " "
X echo "nm didn't seem to work right."
X echo "Trying ar instead..."
X if ar t $libc > libc.tmp; then
X sed -e 's/\.o$//' < libc.tmp > libc.list
X echo "Ok."
X else
X echo "ar didn't seem to work right."
X echo "Maybe this is a Cray...trying bld instead..."
X if bld t $libc | sed -e 's/.*\///' -e 's/\.o:.*$//' > libc.list; then
X echo "Ok."
X else
X echo "That didn't work either. Giving up."
X exit 1
X fi
X fi
X fi
Xfi
Xrmlist="$rmlist libc.tmp libc.list"
X
X: make some quick guesses about what we are up against
Xecho " "
X$echo $n "Hmm... $c"
Xif $contains SIGTSTP /usr/include/signal.h >/dev/null 2>&1 ; then
X echo "Looks kind of like a BSD system, but we'll see..."
X echo exit 0 >bsd
X echo exit 1 >usg
X echo exit 1 >v7
Xelif $contains '^fcntl$' libc.list >/dev/null 2>&1 ; then
X echo "Looks kind of like a USG system, but we'll see..."
X echo exit 1 >bsd
X echo exit 0 >usg
X echo exit 1 >v7
Xelse
X echo "Looks kind of like a version 7 system, but we'll see..."
X echo exit 1 >bsd
X echo exit 1 >usg
X echo exit 0 >v7
Xfi
Xif $contains '^vmssystem$' libc.list >/dev/null 2>&1 ; then
X cat <<'EOI'
XThere is, however, a strange, musty smell in the air that reminds me of
Xsomething...hmm...yes...I've got it...there's a VMS nearby, or I'm a Blit.
XEOI
X echo "exit 0" >eunice
X eunicefix=unixtovms
X d_eunice="$define"
X: it so happens the Eunice I know will not run shell scripts in Unix format
Xelse
X echo " "
X echo "Congratulations. You aren't running Eunice."
X eunicefix=':'
X d_eunice="$undef"
X echo "exit 1" >eunice
Xfi
Xif test -f /xenix; then
X echo "Actually, this looks more like a XENIX system..."
X echo "exit 0" >xenix
Xelse
X echo " "
X echo "It's not Xenix..."
X echo "exit 1" >xenix
Xfi
Xchmod +x xenix
X$eunicefix xenix
Xif test -f /venix; then
X echo "Actually, this looks more like a VENIX system..."
X echo "exit 0" >venix
Xelse
X echo " "
X if xenix; then
X : null
X else
X echo "Nor is it Venix..."
X fi
X echo "exit 1" >venix
Xfi
Xchmod +x bsd usg v7 eunice venix
X$eunicefix bsd usg v7 eunice venix
Xrmlist="$rmlist bsd usg v7 eunice venix xenix"
X
X: see if sh knows # comments
Xecho " "
Xecho "Checking your sh to see if it knows about # comments..."
Xif sh -c '#' >/dev/null 2>&1 ; then
X echo "Your sh handles # comments correctly."
X shsharp=true
X spitshell=cat
X echo " "
X echo "Okay, let's see if #! works on this system..."
X echo "#!/bin/echo hi" > try
X $eunicefix try
X chmod +x try
X try > today
X if $contains hi today >/dev/null 2>&1; then
X echo "It does."
X sharpbang='#!'
X else
X echo "#! /bin/echo hi" > try
X $eunicefix try
X chmod +x try
X try > today
X if test -s today; then
X echo "It does."
X sharpbang='#! '
X else
X echo "It doesn't."
X sharpbang=': use '
X fi
X fi
Xelse
X echo "Your sh doesn't grok # comments--I will strip them later on."
X shsharp=false
X echo "exec grep -v '^#'" >spitshell
X chmod +x spitshell
X $eunicefix spitshell
X spitshell=`pwd`/spitshell
X echo "I presume that if # doesn't work, #! won't work either!"
X sharpbang=': use '
Xfi
X
X: figure out how to guarantee sh startup
Xecho " "
Xecho "Checking out how to guarantee sh startup..."
Xstartsh=$sharpbang'/bin/sh'
Xecho "Let's see if '$startsh' works..."
Xcat >try <<EOSS
X$startsh
Xset abc
Xtest "$?abc" != 1
XEOSS
X
Xchmod +x try
X$eunicefix try
Xif try; then
X echo "Yup, it does."
Xelse
X echo "Nope. You may have to fix up the shell scripts to make sure sh runs them."
Xfi
Xrm -f try today
X
X: set up shell script to do ~ expansion
Xcat >filexp <<EOSS
X$startsh
X: expand filename
Xcase "\$1" in
X ~/*|~)
X echo \$1 | $sed "s|~|\${HOME-\$LOGDIR}|"
X ;;
X ~*)
X if $test -f /bin/csh; then
X /bin/csh -f -c "glob \$1"
X echo ""
X else
X name=\`$expr x\$1 : '..\([^/]*\)'\`
X dir=\`$sed -n -e "/^\${name}:/{s/^[^:]*:[^:]*:[^:]*:[^:]*:[^:]*:\([^:]*\).*"'\$'"/\1/" -e p -e q -e '}' </etc/passwd\`
X if $test ! -d "\$dir"; then
X me=\`basename \$0\`
X echo "\$me: can't locate home directory for: \$name" >&2
X exit 1
X fi
X case "\$1" in
X */*)
X echo \$dir/\`$expr x\$1 : '..[^/]*/\(.*\)'\`
X ;;
X *)
X echo \$dir
X ;;
X esac
X fi
X ;;
X*)
X echo \$1
X ;;
Xesac
XEOSS
Xchmod +x filexp
X$eunicefix filexp
X
X: determine where public executables go
Xcase "$bin" in
X'')
X dflt=`loc . /bin /usr/local/bin /usr/lbin /usr/local /usr/bin`
X ;;
X*) dflt="$bin"
X ;;
Xesac
Xcont=true
Xwhile $test "$cont" ; do
X echo " "
X rp="Where do you want to put the public executables? [$dflt]"
X $echo $n "$rp $c"
X . myread
X bin="$ans"
X bin=`filexp $bin`
X if test -d $bin; then
X cont=''
X else
X dflt=n
X rp="Directory $bin doesn't exist. Use that name anyway? [$dflt]"
X $echo $n "$rp $c"
X . myread
X dflt=''
X case "$ans" in
X y*) cont='';;
X esac
X fi
Xdone
X
X: determine where manual pages go
Xcase "$mansrc" in
X'')
X dflt=`loc . /usr/man/man1 /usr/man/mann /usr/man/manl /usr/man/local/man1 /usr/man/u_man/man1 /usr/man/man1`
X ;;
X*) dflt="$mansrc"
X ;;
Xesac
Xcont=true
Xwhile $test "$cont" ; do
X echo " "
X rp="Where do the manual pages (source) go? [$dflt]"
X $echo $n "$rp $c"
X . myread
X mansrc=`filexp "$ans"`
X if test -d $mansrc; then
X cont=''
X else
X dflt=n
X rp="Directory $mansrc doesn't exist. Use that name anyway? [$dflt]"
X $echo $n "$rp $c"
X . myread
X dflt=''
X case "$ans" in
X y*) cont='';;
X esac
X fi
Xdone
Xcase "$mansrc" in
X*l)
X manext=l
X ;;
X*n)
X manext=n
X ;;
X*C)
X manext=C
X ;;
X*)
X manext=1
X ;;
Xesac
X
X: see what memory models we can support
Xcase "$models" in
X'')
X : We may not use Cppsym or we get a circular dependency through cc.
X : But this should work regardless of which cc we eventually use.
X cat >pdp11.c <<'EOP'
Xmain() {
X#ifdef pdp11
X exit(0);
X#else
X exit(1);
X#endif
X}
XEOP
X cc -o pdp11 pdp11.c >/dev/null 2>&1
X if pdp11 2>/dev/null; then
X dflt='unsplit split'
X else
X ans=`loc . X /lib/small /lib/large /usr/lib/small /usr/lib/large /lib/medium /usr/lib/medium /lib/huge`
X case "$ans" in
X X) dflt='none';;
X *) if $test -d /lib/small || $test -d /usr/lib/small; then
X dflt='small'
X else
X dflt=''
X fi
X if $test -d /lib/medium || $test -d /usr/lib/medium; then
X dflt="$dflt medium"
X fi
X if $test -d /lib/large || $test -d /usr/lib/large; then
X dflt="$dflt large"
X fi
X if $test -d /lib/huge || $test -d /usr/lib/huge; then
X dflt="$dflt huge"
X fi
X esac
X fi
X ;;
X*) dflt="$models" ;;
Xesac
X$cat <<EOM
X
XSome systems have different model sizes. On most systems they are called
Xsmall, medium, large, and huge. On the PDP11 they are called unsplit and
Xsplit. If your system doesn't support different memory models, say "none".
XIf you wish to force everything to one memory model, say "none" here and
Xput the appropriate flags later when it asks you for other cc and ld flags.
XVenix systems may wish to put "none" and let the compiler figure things out.
X(In the following question multiple model names should be space separated.)
X
XEOM
Xrp="Which models are supported? [$dflt]"
X$echo $n "$rp $c"
X. myread
Xmodels="$ans"
X
Xcase "$models" in
Xnone)
X small=''
X medium=''
X large=''
X huge=''
X unsplit=''
X split=''
X ;;
X*split)
X case "$split" in
X '')
X if $contains '\-i' /usr/man/man1/ld.1 >/dev/null 2>&1 || \
X $contains '\-i' /usr/man/man1/cc.1 >/dev/null 2>&1; then
X dflt='-i'
X else
X dflt='none'
X fi
X ;;
X *) dflt="$split";;
X esac
X rp="What flag indicates separate I and D space? [$dflt]"
X $echo $n "$rp $c"
X . myread
X case "$ans" in
X none) ans='';;
X esac
X split="$ans"
X unsplit=''
X ;;
X*large*|*small*|*medium*|*huge*)
X case "$model" in
X *large*)
X case "$large" in
X '') dflt='-Ml';;
X *) dflt="$large";;
X esac
X rp="What flag indicates large model? [$dflt]"
X $echo $n "$rp $c"
X . myread
X case "$ans" in
X none) ans='';
X esac
X large="$ans"
X ;;
X *) large='';;
X esac
X case "$model" in
X *huge*)
X case "$huge" in
X '') dflt='-Mh';;
X *) dflt="$huge";;
X esac
X rp="What flag indicates huge model? [$dflt]"
X $echo $n "$rp $c"
X . myread
X case "$ans" in
X none) ans='';
X esac
X huge="$ans"
X ;;
X *) huge="$large";;
X esac
X case "$model" in
X *medium*)
X case "$medium" in
X '') dflt='-Mm';;
X *) dflt="$medium";;
X esac
X rp="What flag indicates medium model? [$dflt]"
X $echo $n "$rp $c"
X . myread
X case "$ans" in
X none) ans='';
X esac
X medium="$ans"
X ;;
X *) medium="$large";;
X esac
X case "$model" in
X *small*)
X case "$small" in
X '') dflt='none';;
X *) dflt="$small";;
X esac
X rp="What flag indicates small model? [$dflt]"
X $echo $n "$rp $c"
X . myread
X case "$ans" in
X none) ans='';
X esac
X small="$ans"
X ;;
X *) small='';;
X esac
X ;;
X*)
X echo "Unrecognized memory models--you may have to edit Makefile.SH"
X ;;
Xesac
X
X: see if we need a special compiler
Xecho " "
Xif usg; then
X case "$cc" in
X '')
X case "$Mcc" in
X /*) dflt='Mcc'
X ;;
X *)
X case "$large" in
X -M*)
X dflt='cc'
X ;;
X *)
X if $contains '\-M' $mansrc/cc.1 >/dev/null 2>&1 ; then
X dflt='cc -M'
X else
X dflt='cc'
X fi
X ;;
X esac
X ;;
X esac
X ;;
X *) dflt="$cc";;
X esac
X $cat <<'EOM'
X
XOn some systems the default C compiler will not resolve multiple global
Xreferences that happen to have the same name. On some such systems the
X"Mcc" command may be used to force these to be resolved. On other systems
Xa "cc -M" command is required. (Note that the -M flag on other systems
Xindicates a memory model to use!) If you have the Gnu C compiler, you
Xmight wish to use that instead. What command will force resolution on
XEOM
X $echo $n "this system? [$dflt] $c"
X rp="Command to resolve multiple refs? [$dflt]"
X . myread
X cc="$ans"
Xelse
X case "$cc" in
X '') dflt=cc;;
X *) dflt="$cc";;
X esac
X rp="Use which C compiler? [$dflt]"
X $echo $n "$rp $c"
X . myread
X cc="$ans"
Xfi
Xcase "$cc" in
Xgcc*) cpp=`loc gcc-cpp $cpp $pth`;;
Xesac
X
Xcase "$ccflags" in
X'') dflt='none';;
X*) dflt="$ccflags";;
Xesac
Xecho " "
Xrp="Any additional cc flags? [$dflt]"
X$echo $n "$rp $c"
X. myread
Xcase "$ans" in
Xnone) ans='';
Xesac
Xccflags="$ans"
X
Xcase "$ldflags" in
X'') if venix; then
X dflt='-i -z'
X else
X dflt='none'
X fi
X ;;
X*) dflt="$ldflags";;
Xesac
Xecho " "
Xrp="Any additional ld flags (such as libraries)? [$dflt]"
X$echo $n "$rp $c"
X. myread
Xcase "$ans" in
Xnone) ans='';
Xesac
Xldflags="$ans"
Xrmlist="$rmlist pdp11"
X
X: check for ordering of bytes in a long
Xecho " "
Xcase "$byteorder" in
X'')
X echo "Checking to see how your bytes are ordered..."
X $cat >try.c <<'EOCP'
X#include <stdio.h>
Xmain()
X{
X int i;
X union {
X unsigned long l;
X char c[4];
X } u;
X
X u.l = 0x04030201;
X printf("%c%c%c%c\n", u.c[0]+'0', u.c[1]+'0', u.c[2]+'0', u.c[3]+'0');
X}
XEOCP
X if $cc try.c -o try >/dev/null 2>&1 ; then
X dflt=`try`
X else
X dflt='4321'
X echo "(I can't seem to compile the test program. Guessing big-endian...)"
X fi
X ;;
X*)
X dflt="$byteorder"
X ;;
Xesac
Xrp="What is the order of bytes in a long? [$dflt]"
X$echo $n "$rp $c"
X. myread
Xbyteorder="$ans"
X$rm -f try.c try
X
X: see how we invoke the C preprocessor
Xecho " "
Xecho "Now, how can we feed standard input to your C preprocessor..."
Xcat <<'EOT' >testcpp.c
X#define ABC abc
X#define XYZ xyz
XABC.XYZ
XEOT
Xecho 'Maybe "'"$cc"' -E" will work...'
X$cc -E <testcpp.c >testcpp.out 2>&1
Xif $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
X echo "Yup, it does."
X cppstdin="$cc -E"
X cppminus='';
Xelse
X echo 'Nope, maybe "'$cpp'" will work...'
X $cpp <testcpp.c >testcpp.out 2>&1
X if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
X echo "Yup, it does."
X cppstdin="$cpp"
X cppminus='';
X else
X echo 'No such luck...maybe "'$cpp' -" will work...'
X $cpp - <testcpp.c >testcpp.out 2>&1
X if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
X echo "It works!"
X cppstdin="$cpp"
X cppminus='-';
X else
X echo 'Nixed again...maybe "'"$cc"' -E -" will work...'
X $cc -E - <testcpp.c >testcpp.out 2>&1
X if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
X echo "Hooray, it works! I was beginning to wonder."
X cppstdin="$cc -E"
X cppminus='-';
X else
X echo 'Nope...maybe "'"$cc"' -P" will work...'
X $cc -P <testcpp.c >testcpp.out 2>&1
X if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
X echo "Yup, that does."
X cppstdin="$cc -P"
X cppminus='';
X else
X echo 'Nope...maybe "'"$cc"' -P -" will work...'
X $cc -P - <testcpp.c >testcpp.out 2>&1
X if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
X echo "Yup, that does."
X cppstdin="$cc -P"
X cppminus='-';
X else
X echo 'Hmm...perhaps you already told me...'
X case "$cppstdin" in
X '') ;;
X *) $cppstdin $cppminus <testcpp.c >testcpp.out 2>&1;;
X esac
X if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
X echo "Hooray, you did! I was beginning to wonder."
X else
X echo 'Uh-uh. Time to get fancy...'
X cd ..
X echo 'Trying (cat >/tmp/$$.c; '"$cc"' -E /tmp/$$.c; rm /tmp/$$.c)'
X echo 'cat >/tmp/$$.c; '"$cc"' -E /tmp/$$.c; rm /tmp/$$.c' >cppstdin
X chmod 755 cppstdin
X cppstdin=`pwd`/cppstdin
X cppminus='';
X cd UU
X $cppstdin <testcpp.c >testcpp.out 2>&1
X if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
X echo "Eureka!."
X else
X dflt=blurfl
X $echo $n "No dice. I can't find a C preprocessor. Name one: $c"
X rp='Name a C preprocessor:'
X . myread
X cppstdin="$ans"
X $cppstdin <testcpp.c >testcpp.out 2>&1
X if $contains 'abc.*xyz' testcpp.out >/dev/null 2>&1 ; then
X echo "OK, that will do."
X else
X echo "Sorry, I can't get that to work. Go find one."
X exit 1
X fi
X fi
X fi
X fi
X fi
X fi
X fi
X fi
Xfi
Xrm -f testcpp.c testcpp.out
X
X: see if bcopy exists
Xecho " "
Xif $contains '^bcopy$' libc.list >/dev/null 2>&1; then
X echo 'bcopy() found.'
X d_bcopy="$define"
Xelse
X echo 'bcopy() not found.'
X d_bcopy="$undef"
Xfi
X
X: see if sprintf is declared as int or pointer to char
Xecho " "
Xcat >.ucbsprf.c <<'EOF'
Xmain() { char buf[10]; exit((unsigned long)sprintf(buf,"%s","foo") > 10L); }
XEOF
Xif $cc .ucbsprf.c -o .ucbsprf >/dev/null 2>&1 && .ucbsprf; then
X echo "Your sprintf() returns (int)."
X d_charsprf="$undef"
Xelse
X echo "Your sprintf() returns (char*)."
X d_charsprf="$define"
Xfi
X/bin/rm -f .ucbsprf.c .ucbsprf
X
X: see if crypt exists
Xecho " "
Xif $contains '^crypt$' libc.list >/dev/null 2>&1; then
X echo 'crypt() found.'
X d_crypt="$define"
Xelse
X echo 'crypt() not found.'
X d_crypt="$undef"
Xfi
X
X: now see if they want to do setuid emulation
Xcase "$d_dosuid" in
X'') dflt=n;;
X*undef*) dflt=n;;
X*) dflt=y;;
Xesac
Xcat <<EOM
X
XSome sites have disabled setuid #! scripts because of a bug in the kernel
Xthat prevents them from being secure. If you are on such a system, the
Xsetuid/setgid bits on scripts are currently useless. It is possible for
X$package to detect those bits and emulate setuid/setgid in a secure fashion
Xuntil a better solution is devised for the kernel problem.
X
XEOM
Xrp="Do you want to do setuid/setgid emulation? [$dflt]"
Xecho $n "$rp $c"
X. myread
Xcase "$ans" in
X'') $ans="$dflt";;
Xesac
Xcase "$ans" in
Xy*) d_dosuid="$define";;
X*) d_dosuid="$undef";;
Xesac
X
X: see if fchmod exists
Xecho " "
Xif $contains '^fchmod$' libc.list >/dev/null 2>&1; then
X echo 'fchmod() found.'
X d_fchmod="$define"
Xelse
X echo 'fchmod() not found.'
X d_fchmod="$undef"
Xfi
X
X: see if fchown exists
Xecho " "
Xif $contains '^fchown$' libc.list >/dev/null 2>&1; then
X echo 'fchown() found.'
X d_fchown="$define"
Xelse
X echo 'fchown() not found.'
X d_fchown="$undef"
Xfi
X
X: see if this is an fcntl system
Xecho " "
Xif $test -r /usr/include/fcntl.h ; then
X d_fcntl="$define"
X echo "fcntl.h found."
Xelse
X d_fcntl="$undef"
X echo "No fcntl.h found, but that's ok."
Xfi
X
X: see if flock exists
Xecho " "
Xif $contains '^flock$' libc.list >/dev/null 2>&1; then
X echo 'flock() found.'
X d_flock="$define"
Xelse
X echo 'flock() not found.'
X d_flock="$undef"
Xfi
X
X: see if getgroups exists
Xecho " "
Xif $contains '^getgroups$' libc.list >/dev/null 2>&1; then
X echo 'getgroups() found.'
X d_getgrps="$define"
Xelse
X echo 'getgroups() not found.'
X d_getgrps="$undef"
Xfi
X
X: see if getpgrp exists
Xecho " "
Xif $contains '^getpgrp$' libc.list >/dev/null 2>&1; then
X echo 'getpgrp() found.'
X d_getpgrp="$define"
Xelse
X echo 'getpgrp() not found.'
X d_getpgrp="$undef"
Xfi
X
X: see if getpriority exists
Xecho " "
Xif $contains '^getpriority$' libc.list >/dev/null 2>&1; then
X echo 'getpriority() found.'
X d_getprior="$define"
Xelse
X echo 'getpriority() not found.'
X d_getprior="$undef"
Xfi
X
X: see if htonl exists
Xecho " "
Xif $contains '^htonl$' libc.list >/dev/null 2>&1; then
X echo 'htonl() found.'
X d_htonl="$define"
Xelse
X echo 'htonl() not found.'
X d_htonl="$undef"
Xfi
X
X: index or strcpy
Xecho " "
Xcase "$d_index" in
Xn) dflt=n;;
X*) dflt=y;;
Xesac
Xif $contains '^index$' libc.list >/dev/null 2>&1 ; then
X if $contains '^strchr$' libc.list >/dev/null 2>&1 ; then
X echo "Your system has both index() and strchr(). Shall I use"
X rp="index() rather than strchr()? [$dflt]"
X $echo $n "$rp $c"
X . myread
X case "$ans" in
X n*) d_index="$define" ;;
X *) d_index="$undef" ;;
X esac
X else
X d_index="$undef"
X echo "index() found."
X fi
Xelse
X if $contains '^strchr$' libc.list >/dev/null 2>&1 ; then
X d_index="$define"
X echo "strchr() found."
X else
X echo "No index() or strchr() found!"
X d_index="$undef"
X fi
Xfi
X
X: see if ioctl defs are in sgtty/termio or sys/ioctl
Xecho " "
Xif $test -r /usr/include/sys/ioctl.h ; then
X d_ioctl="$define"
X echo "sys/ioctl.h found."
Xelse
X d_ioctl="$undef"
X echo "sys/ioctl.h not found, assuming ioctl args are defined in sgtty.h."
Xfi
X
X: see if killpg exists
Xecho " "
Xif $contains '^killpg$' libc.list >/dev/null 2>&1; then
X echo 'killpg() found.'
X d_killpg="$define"
Xelse
X echo 'killpg() not found.'
X d_killpg="$undef"
Xfi
X
X: see if memcpy exists
Xecho " "
Xif $contains '^memcpy$' libc.list >/dev/null 2>&1; then
X echo 'memcpy() found.'
X d_memcpy="$define"
Xelse
X echo 'memcpy() not found.'
X d_memcpy="$undef"
Xfi
X
X: see if mkdir exists
Xecho " "
Xif $contains '^mkdir$' libc.list >/dev/null 2>&1; then
X echo 'mkdir() found.'
X d_mkdir="$define"
Xelse
X echo 'mkdir() not found.'
X d_mkdir="$undef"
Xfi
X
X: see if ndbm is available
Xecho " "
Xif $test -r /usr/include/ndbm.h ; then
X d_ndbm="$define"
X echo "ndbm.h found."
Xelse
X d_ndbm="$undef"
X echo "ndbm.h not found."
Xfi
X
X: see if we have the old dbm
Xecho " "
Xif $test -r /usr/include/dbm.h ; then
X d_odbm="$define"
X echo "dbm.h found."
Xelse
X d_odbm="$undef"
X echo "dbm.h not found."
Xfi
X
X: see if rename exists
Xecho " "
Xif $contains '^rename$' libc.list >/dev/null 2>&1; then
X echo 'rename() found.'
X d_rename="$define"
Xelse
X echo 'rename() not found.'
X d_rename="$undef"
Xfi
X
X: see if rmdir exists
Xecho " "
Xif $contains '^rmdir$' libc.list >/dev/null 2>&1; then
X echo 'rmdir() found.'
X d_rmdir="$define"
Xelse
X echo 'rmdir() not found.'
X d_rmdir="$undef"
Xfi
X
X: see if setegid exists
Xecho " "
Xif $contains '^setegid$' libc.list >/dev/null 2>&1; then
X echo 'setegid() found.'
X d_setegid="$define"
Xelse
X echo 'setegid() not found.'
X d_setegid="$undef"
Xfi
X
X: see if seteuid exists
Xecho " "
Xif $contains '^seteuid$' libc.list >/dev/null 2>&1; then
X echo 'seteuid() found.'
X d_seteuid="$define"
Xelse
X echo 'seteuid() not found.'
X d_seteuid="$undef"
Xfi
X
X: see if setpgrp exists
Xecho " "
Xif $contains '^setpgrp$' libc.list >/dev/null 2>&1; then
X echo 'setpgrp() found.'
X d_setpgrp="$define"
Xelse
X echo 'setpgrp() not found.'
X d_setpgrp="$undef"
Xfi
X
X: see if setpriority exists
Xecho " "
Xif $contains '^setpriority$' libc.list >/dev/null 2>&1; then
X echo 'setpriority() found.'
X d_setprior="$define"
Xelse
X echo 'setpriority() not found.'
X d_setprior="$undef"
Xfi
X
X: see if setregid exists
Xecho " "
Xif $contains '^setregid$' libc.list >/dev/null 2>&1; then
X echo 'setregid() found.'
X d_setregid="$define"
Xelse
X echo 'setregid() not found.'
X d_setregid="$undef"
Xfi
X
X: see if setreuid exists
Xecho " "
Xif $contains '^setreuid$' libc.list >/dev/null 2>&1; then
X echo 'setreuid() found.'
X d_setreuid="$define"
Xelse
X echo 'setreuid() not found.'
X d_setreuid="$undef"
Xfi
X
X: see if setrgid exists
Xecho " "
Xif $contains '^setrgid$' libc.list >/dev/null 2>&1; then
X echo 'setrgid() found.'
X d_setrgid="$define"
Xelse
X echo 'setrgid() not found.'
X d_setrgid="$undef"
Xfi
X
X: see if setruid exists
Xecho " "
Xif $contains '^setruid$' libc.list >/dev/null 2>&1; then
X echo 'setruid() found.'
X d_setruid="$define"
Xelse
X echo 'setruid() not found.'
X d_setruid="$undef"
Xfi
X
Xsocketlib=''
Xsockethdr=''
X: see whether socket exists
Xecho " "
Xif $contains socket libc.list >/dev/null 2>&1; then
X echo "Looks like you have Berkeley networking support."
X d_socket="$define"
X : now check for advanced features
X if $contains setsockopt libc.list >/dev/null 2>&1; then
X d_oldsock="$undef"
X else
X echo "...but it uses the old 4.1c interface, rather than 4.2"
X d_oldsock="$define"
X fi
Xelse
X : hpux, for one, puts all the socket stuff in socklib.o
X if $contains socklib libc.list >/dev/null 2>&1; then
X echo "Looks like you have Berkeley networking support."
X d_socket="$define"
X : we will have to assume that it supports the 4.2 BSD interface
X d_oldsock="$undef"
X else
X echo "Hmmm...you don't have Berkeley networking in libc.a..."
X : look for an optional networking library
X if test -f /usr/lib/libnet.a; then
X (ar t /usr/lib/libnet.a ||
X nm -g /usr/lib/libnet.a) 2>/dev/null >> libc.list
X if $contains socket libc.list >/dev/null 2>&1; then
X echo "but the Wollongong group seems to have hacked it in."
X socketlib="-lnet"
X sockethdr="-I/usr/netinclude"
X d_socket="$define"
X : now check for advanced features
X if $contains setsockopt libc.list >/dev/null 2>&1; then
X d_oldsock="$undef"
X else
X echo "...using the old 4.1c interface, rather than 4.2"
X d_oldsock="$define"
X fi
X else
X echo "or even in libnet.a, which is peculiar."
X d_socket="$undef"
X d_oldsock="$undef"
X fi
X else
X echo "or anywhere else I see."
X d_socket="$undef"
X d_oldsock="$undef"
X fi
X fi
Xfi
X
X: see if stat knows about block sizes
Xecho " "
Xif $contains 'st_blocks;' /usr/include/sys/stat.h >/dev/null 2>&1 ; then
X if $contains 'st_blksize;' /usr/include/sys/stat.h >/dev/null 2>&1 ; then
X echo "Your stat knows about block sizes."
X d_statblks="$define"
X else
X echo "Your stat doesn't know about block sizes."
X d_statblks="$undef"
X fi
Xelse
X echo "Your stat doesn't know about block sizes."
X d_statblks="$undef"
Xfi
X
X: see if stdio is really std
Xecho " "
Xif $contains 'char.*_ptr;' /usr/include/stdio.h >/dev/null 2>&1 ; then
X if $contains '_cnt;' /usr/include/stdio.h >/dev/null 2>&1 ; then
X echo "Your stdio is pretty std."
X d_stdstdio="$define"
X else
X echo "Your stdio isn't very std."
X d_stdstdio="$undef"
X fi
Xelse
X echo "Your stdio isn't very std."
X d_stdstdio="$undef"
Xfi
X
X: check for structure copying
Xecho " "
Xecho "Checking to see if your C compiler can copy structs..."
X$cat >try.c <<'EOCP'
Xmain()
X{
X struct blurfl {
X int dyick;
X } foo, bar;
X
X foo = bar;
X}
XEOCP
Xif $cc -c try.c >/dev/null 2>&1 ; then
X d_strctcpy="$define"
X echo "Yup, it can."
Xelse
X d_strctcpy="$undef"
X echo "Nope, it can't."
Xfi
X$rm -f try.*
X
X: see if symlink exists
Xecho " "
Xif $contains '^symlink$' libc.list >/dev/null 2>&1; then
X echo 'symlink() found.'
X d_symlink="$define"
Xelse
X echo 'symlink() not found.'
X d_symlink="$undef"
Xfi
X
X: see if struct tm is defined in sys/time.h
Xecho " "
Xif $contains 'struct tm' /usr/include/time.h >/dev/null 2>&1 ; then
X echo "You have struct tm defined in <time.h> rather than <sys/time.h>."
X d_tminsys="$undef"
X if test -f /usr/include/sys/time.h; then
X i_systime="$define"
X else
X i_systime="$undef"
X fi
Xelse
X echo "You have struct tm defined in <sys/time.h> rather than <time.h>."
X d_tminsys="$define"
X i_systime="$define"
Xfi
X
X: see if this is a varargs system
Xecho " "
Xif $test -r /usr/include/varargs.h ; then
X d_varargs="$define"
X echo "varargs.h found."
Xelse
X d_varargs="$undef"
X echo "No varargs.h found, but that's ok (I hope)."
Xfi
X
X: see if there is a vfork
Xecho " "
Xif $contains '^vfork$' libc.list >/dev/null 2>&1 ; then
X echo "vfork() found."
X d_vfork="$undef"
Xelse
X echo "No vfork() found--will use fork() instead."
X d_vfork="$define"
Xfi
X
X: see if signal is declared as pointer to function returning int or void
Xecho " "
Xif $contains 'void.*signal' /usr/include/signal.h >/dev/null 2>&1 ; then
X echo "You have void (*signal())() instead of int."
X d_voidsig="$define"
Xelse
X echo "You have int (*signal())() instead of void."
X d_voidsig="$undef"
Xfi
X
X: see if vprintf exists
Xecho " "
Xif $contains '^vprintf$' libc.list >/dev/null 2>&1; then
X echo 'vprintf() found.'
X d_vprintf="$define"
Xelse
X echo 'vprintf() not found.'
X d_vprintf="$undef"
Xfi
X
X: check for void type
Xecho " "
X$cat <<EOM
XChecking to see how well your C compiler groks the void type...
X
X Support flag bits are:
X 1: basic void declarations.
X 2: arrays of pointers to functions returning void.
X 4: operations between pointers to and addresses of void functions.
X
XEOM
Xcase "$voidflags" in
X'')
X $cat >try.c <<'EOCP'
X#if TRY & 1
Xvoid main() {
X#else
Xmain() {
X#endif
X extern void moo(); /* function returning void */
X void (*goo)(); /* ptr to func returning void */
X#if TRY & 2
X void (*foo[10])();
X#endif
X
X#if TRY & 4
X if(goo == moo) {
X exit(0);
X }
X#endif
X exit(0);
X}
XEOCP
X if $cc -S -DTRY=$defvoidused try.c >.out 2>&1 ; then
X voidflags=$defvoidused
X echo "It appears to support void."
X if $contains warning .out >/dev/null 2>&1; then
X echo "However, you might get some warnings that look like this:"
X $cat .out
X fi
X else
X echo "Hmm, your compiler has some difficulty with void. Checking further..."
X if $cc -S -DTRY=1 try.c >/dev/null 2>&1 ; then
X echo "It supports 1..."
X if $cc -S -DTRY=3 try.c >/dev/null 2>&1 ; then
X voidflags=3
X echo "And it supports 2 but not 4."
X else
X echo "It doesn't support 2..."
X if $cc -S -DTRY=5 try.c >/dev/null 2>&1 ; then
X voidflags=5
X echo "But it supports 4."
X else
X voidflags=1
X echo "And it doesn't support 4."
X fi
X fi
X else
X echo "There is no support at all for void."
X voidflags=0
X fi
X fi
Xesac
Xdflt="$voidflags";
Xrp="Your void support flags add up to what? [$dflt]"
X$echo $n "$rp $c"
X. myread
Xvoidflags="$ans"
X$rm -f try.* .out
X
X: see what type gids are declared as in the kernel
Xcase "$gidtype" in
X'')
X if $contains 'gid_t;' /usr/include/sys/types.h >/dev/null 2>&1 ; then
X dflt='gid_t';
X else
X set `grep 'groups\[NGROUPS\];' /usr/include/sys/user.h 2>/dev/null` unsigned short
X case $1 in
X unsigned) dflt="$1 $2" ;;
X *) dflt="$1" ;;
X esac
X fi
X ;;
X*) dflt="$gidtype"
X ;;
Xesac
Xcont=true
Xecho " "
Xrp="What type are group ids on this system declared as? [$dflt]"
X$echo $n "$rp $c"
X. myread
Xgidtype="$ans"
X
X: check for length of integer
Xecho " "
Xcase "$intsize" in
X'')
X echo "Checking to see how big your integers are..."
X $cat >try.c <<'EOCP'
X#include <stdio.h>
Xmain()
X{
X printf("%d\n", sizeof(int));
X}
XEOCP
X if $cc try.c -o try >/dev/null 2>&1 ; then
X dflt=`try`
X else
X dflt='4'
X echo "(I can't seem to compile the test program. Guessing...)"
X fi
X ;;
X*)
X dflt="$intsize"
X ;;
Xesac
Xrp="What is the size of an integer? [$dflt]"
X$echo $n "$rp $c"
X. myread
Xintsize="$ans"
X$rm -f try.c try
X
X: determine where private executables go
Xcase "$privlib" in
X'')
X dflt=/usr/lib/$package
X test -d /usr/local/lib && dflt=/usr/local/lib/$package
X ;;
X*) dflt="$privlib"
X ;;
Xesac
X$cat <<EOM
X
XThe $package package has some auxiliary files that should be put in a library
Xthat is accessible by everyone. Where do you want to put these private"
XEOM
X$echo $n "but accessible files? [$dflt] $c"
Xrp="Put private files where? [$dflt]"
X. myread
Xprivlib="$ans"
X
X: check for size of random number generator
Xecho " "
Xcase "$randbits" in
X'')
X echo "Checking to see how many bits your rand function produces..."
X $cat >try.c <<'EOCP'
X#include <stdio.h>
Xmain()
X{
X register int i;
X register unsigned long tmp;
X register unsigned long max = 0L;
X
X for (i=1000; i; i--) {
X tmp = (unsigned long)rand();
X if (tmp > max) max = tmp;
X }
X for (i=0; max; i++)
X max /= 2;
X printf("%d\n",i);
X}
XEOCP
X if $cc try.c -o try >/dev/null 2>&1 ; then
X dflt=`try`
X else
X dflt='?'
X echo "(I can't seem to compile the test program...)"
X fi
X ;;
X*)
X dflt="$randbits"
X ;;
Xesac
Xrp="How many bits does your rand() function produce? [$dflt]"
X$echo $n "$rp $c"
X. myread
Xrandbits="$ans"
X$rm -f try.c try
X
X: generate list of signal names
Xecho " "
Xcase "$sig_name" in
X'')
X echo "Generating a list of signal names..."
X set X `kill -l 2>/dev/null`
X shift
X case $# in
X 0) echo 'kill -l' >/tmp/foo$$
X set X `/bin/csh -f </tmp/foo$$`
X shift
X case $# in
X 0)set HUP INT QUIT ILL TRAP IOT EMT FPE KILL BUS SEGV SYS PIPE ALRM TERM
X ;;
X esac
X ;;
X esac
X sig_name="ZERO $*"
X ;;
Xesac
Xecho "Signals are: $sig_name"
X
X: see what type of char stdio uses.
Xecho " "
Xif $contains 'unsigned.*char.*_ptr;' /usr/include/stdio.h >/dev/null 2>&1 ; then
X echo "Your stdio uses unsigned chars."
X stdchar="unsigned char"
Xelse
X echo "Your stdio uses signed chars."
X stdchar="char"
Xfi
X
X: see what type uids are declared as in the kernel
Xcase "$uidtype" in
X'')
X if $contains 'uid_t;' /usr/include/sys/types.h >/dev/null 2>&1 ; then
X dflt='uid_t';
X else
X set `grep '_ruid;' /usr/include/sys/user.h 2>/dev/null` unsigned short
X case $1 in
X unsigned) dflt="$1 $2" ;;
X *) dflt="$1" ;;
X esac
X fi
X ;;
X*) dflt="$uidtype"
X ;;
Xesac
Xcont=true
Xecho " "
Xrp="What type are user ids on this system declared as? [$dflt]"
X$echo $n "$rp $c"
X. myread
Xuidtype="$ans"
X
X: preserve RCS keywords in files with variable substitution, grrr
XLog='$Log'
XHeader='$Header'
X
X
X: see if we should include -ldbm
Xecho " "
Xif $test -r /usr/lib/libdbm.a || $test -r /usr/local/lib/libdbm.a ; then
X echo "-ldbm found."
X libdbm='-ldbm'
Xelse
X ans=`loc libdbm.a x $libpth`
X case "$ans" in
X x)
X echo "No dbm library found."
X libdbm=''
X ;;
X *)
X echo "DBM library found in $ans."
X libdbm="$ans"
X ;;
X esac
Xfi
X
X: see if we should include -lnm
Xecho " "
Xif $test -r /usr/lib/libnm.a || $test -r /usr/local/lib/libnm.a ; then
X echo "New math library found."
X libnm='-lnm'
Xelse
X ans=`loc libnm.a x $libpth`
X case "$ans" in
X x)
X echo "No nm library found--the normal math library will have to do."
X libnm=''
X ;;
X *)
X echo "New math library found in $ans."
X libnm="$ans"
X ;;
X esac
Xfi
X
X: determine which malloc to compile in
Xecho " "
Xcase "$usemymalloc" in
X'')
X if bsd || v7; then
X dflt='y'
X else
X dflt='n'
X fi
X ;;
X*) dflt="$usemymalloc"
X ;;
Xesac
Xrp="Do you wish to attempt to use the malloc that comes with $package? [$dflt]"
X$echo $n "$rp $c"
X. myread
Xcase "$ans" in
X'') ans=$dflt;;
Xesac
Xusemymalloc="$ans"
Xcase "$ans" in
Xy*) mallocsrc='malloc.c'; mallocobj='malloc.o';;
X*) mallocsrc=''; mallocobj='';;
Xesac
X
Xecho " "
Xecho "End of configuration questions."
Xecho " "
X
X: create config.sh file
Xecho " "
Xif test -d ../UU; then
X cd ..
Xfi
Xecho "Creating config.sh..."
X$spitshell <<EOT >config.sh
X$startsh
X# config.sh
X# This file was produced by running the Configure script.
X
Xd_eunice='$d_eunice'
Xeunicefix='$eunicefix'
Xdefine='$define'
Xloclist='$loclist'
Xexpr='$expr'
Xsed='$sed'
Xecho='$echo'
Xcat='$cat'
Xrm='$rm'
Xmv='$mv'
Xcp='$cp'
Xtail='$tail'
Xtr='$tr'
Xmkdir='$mkdir'
Xsort='$sort'
Xuniq='$uniq'
Xgrep='$grep'
Xtrylist='$trylist'
Xtest='$test'
Xinews='$inews'
Xegrep='$egrep'
Xmore='$more'
Xpg='$pg'
XMcc='$Mcc'
Xvi='$vi'
Xmailx='$mailx'
Xmail='$mail'
Xcpp='$cpp'
Xperl='$perl'
XLog='$Log'
XHeader='$Header'
Xbin='$bin'
Xbyteorder='$byteorder'
Xcontains='$contains'
Xcppstdin='$cppstdin'
Xcppminus='$cppminus'
Xd_bcopy='$d_bcopy'
Xd_charsprf='$d_charsprf'
Xd_crypt='$d_crypt'
Xd_dosuid='$d_dosuid'
Xd_fchmod='$d_fchmod'
Xd_fchown='$d_fchown'
Xd_fcntl='$d_fcntl'
Xd_flock='$d_flock'
Xd_getgrps='$d_getgrps'
Xd_getpgrp='$d_getpgrp'
Xd_getprior='$d_getprior'
Xd_htonl='$d_htonl'
Xd_index='$d_index'
Xd_ioctl='$d_ioctl'
Xd_killpg='$d_killpg'
Xd_memcpy='$d_memcpy'
Xd_mkdir='$d_mkdir'
Xd_ndbm='$d_ndbm'
Xd_odbm='$d_odbm'
Xd_rename='$d_rename'
Xd_rmdir='$d_rmdir'
Xd_setegid='$d_setegid'
Xd_seteuid='$d_seteuid'
Xd_setpgrp='$d_setpgrp'
Xd_setprior='$d_setprior'
Xd_setregid='$d_setregid'
Xd_setreuid='$d_setreuid'
Xd_setrgid='$d_setrgid'
Xd_setruid='$d_setruid'
Xd_socket='$d_socket'
Xd_oldsock='$d_oldsock'
Xsocketlib='$socketlib'
Xsockethdr='$sockethdr'
Xd_statblks='$d_statblks'
Xd_stdstdio='$d_stdstdio'
Xd_strctcpy='$d_strctcpy'
Xd_symlink='$d_symlink'
Xd_tminsys='$d_tminsys'
Xi_systime='$i_systime'
Xd_varargs='$d_varargs'
Xd_vfork='$d_vfork'
Xd_voidsig='$d_voidsig'
Xd_vprintf='$d_vprintf'
Xgidtype='$gidtype'
Xintsize='$intsize'
Xlibc='$libc'
Xlibdbm='$libdbm'
Xlibnm='$libnm'
Xmallocsrc='$mallocsrc'
Xmallocobj='$mallocobj'
Xusemymalloc='$usemymalloc'
Xmansrc='$mansrc'
Xmanext='$manext'
Xmodels='$models'
Xsplit='$split'
Xsmall='$small'
Xmedium='$medium'
Xlarge='$large'
Xhuge='$huge'
Xccflags='$ccflags'
Xldflags='$ldflags'
Xcc='$cc'
Xn='$n'
Xc='$c'
Xpackage='$package'
Xrandbits='$randbits'
Xsig_name='$sig_name'
Xspitshell='$spitshell'
Xshsharp='$shsharp'
Xsharpbang='$sharpbang'
Xstartsh='$startsh'
Xstdchar='$stdchar'
Xuidtype='$uidtype'
Xvoidflags='$voidflags'
Xdefvoidused='$defvoidused'
Xlib='$lib'
Xprivlib='$privlib'
XCONFIG=true
XEOT
X
XCONFIG=true
X
Xecho " "
Xdflt=''
Xfastread=''
Xecho "If you didn't make any mistakes, then just type a carriage return here."
Xrp="If you need to edit config.sh, do it as a shell escape here:"
X$echo $n "$rp $c"
X. UU/myread
Xcase "$ans" in
X'') ;;
X*) : in case they cannot read
X eval $ans;;
Xesac
X. ./config.sh
X
Xecho " "
Xecho "Doing variable substitutions on .SH files..."
Xset x `awk '{print $1}' <MANIFEST | $grep '\.SH'`
Xshift
Xcase $# in
X0) set x *.SH; shift;;
Xesac
Xif test ! -f $1; then
X shift
Xfi
Xfor file in $*; do
X case "$file" in
X */*)
X dir=`$expr X$file : 'X\(.*\)/'`
X file=`$expr X$file : 'X.*/\(.*\)'`
X (cd $dir && . $file)
X ;;
X *)
X . $file
X ;;
X esac
Xdone
Xif test -f config.h.SH; then
X if test ! -f config.h; then
X : oops, they left it out of MANIFEST, probably, so do it anyway.
X . config.h.SH
X fi
Xfi
X
Xif $contains '^depend:' Makefile >/dev/null 2>&1; then
X dflt=n
X $cat <<EOM
X
XNow you need to generate make dependencies by running "make depend".
XYou might prefer to run it in background: "make depend > makedepend.out &"
XIt can take a while, so you might not want to run it right now.
X
XEOM
X rp="Run make depend now? [$dflt]"
X $echo $n "$rp $c"
X . UU/myread
X case "$ans" in
X y*) make depend
X echo "Now you must run a make."
X ;;
X *) echo "You must run 'make depend' then 'make'."
X ;;
X esac
Xelif test -f Makefile; then
X echo " "
X echo "Now you must run a make."
Xelse
X echo "Done."
Xfi
X
X$rm -f kit*isdone
X: the following is currently useless
Xcd UU && $rm -f $rmlist
X: since this removes it all anyway
Xcd .. && $rm -rf UU
X: end of Configure
!STUFFY!FUNK!
echo Extracting t/base.pat
sed >t/base.pat <<'!STUFFY!FUNK!' -e 's/X//'
X#!./perl
X
X# $Header: base.pat,v 2.0 88/06/05 00:12:08 root Exp $
X
Xprint "1..2\n";
X
X# first test to see if we can run the tests.
X
X$_ = 'test';
Xif (/^test/) { print "ok 1\n"; } else { print "not ok 1\n";}
Xif (/^foo/) { print "not ok 2\n"; } else { print "ok 2\n";}
!STUFFY!FUNK!
echo ""
echo "End of kit 3 (of 23)"
cat /dev/null >kit3isdone
run=''
config=''
for iskit in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23; do
if test -f kit${iskit}isdone; then
run="$run $iskit"
else
todo="$todo $iskit"
fi
done
case $todo in
'')
echo "You have run all your kits. Please read README and then type Configure."
chmod 755 Configure
;;
*) echo "You have run$run."
echo "You still need to run$todo."
;;
esac
: Someone might mail this, so...
exit