scon@unmc.UUCP (Student Consultants) (09/13/86)
I'm using an Everex 1200 baud internal modem set up as com2 on a Telex 1280 ( AT clone ), and am trying to use Kermit ( v2.29 ) as my communications package by setting macros to do the dialing. However, when I try to enter the modems command mode by "connect" from Kermit, I hit a blank wall. I can't get any communication from kermit to my modem. I have checked all the settings on Kermit, and have even tried switching the com ports on the modem. I have tried different communications packages, Pibterm, Procomm, QModem, PC-VT, and they all work perfectly fine. As a counter check, I have used my Kermit with different modems ( Racal Vadic - Multi Tech ), and again everything is fine. Kermit performs beautifully!! So my problem has to be with Kermit and my modem having a personality conflict right??? Has anybody else encountered this, or know what the fix is???? I'd really appreciate any help available cause this thing is driving me NUTZ!! As a quickie after-thought, has anyone set up dialing macros in Kermit for a Racal Vadic?? Thanks guys, you can send replies to wmoore@unmg.UNM, or waynem@unmi.UNM. As before, any help or direction would be greatly appreciated. Wayne L. Moore wmoore@unmg.UNM waynem@unmi.UNM