houser@mcnc.org (Kevin D. Houser ) (11/11/88)
The Magnavox 8CM515 RGB monitor will work properly with the ATARI ST series. After looking at my CoCo 3 RGB specs, and monitor cable, I have determined that the 8CM515 has separate Vsync and Hsync inputs. However, I do not have the pinout for the monitor's 6 pin DIN jack. Do any Atarians or CoCo 3 users out there happen to have the pinouts? Otherwise, I have to tear the CoCo logic board out of the PC type case... Also, where can I find the unusual monitor plug that Atari uses to connect to the computer? All that is necessary is the plug. Kevin Houser houser@mcnc.org (919) 859-5467 H (919) 248-1996 W