mckay@harbor.ecn.purdue.edu (Dwight D. McKay) (08/01/90)
I've not been able to get the TOP 2.0 uucico to sucessfully run on my Atari under OSK. Here's what I see happening: When running "uucico -r1 -x9 pur-ee", uucico runs along fine and dandy until it right after it has dialed the phone. At this point a get, "K = -1" (I think, my system is at home...), when uucico tries to read the login banner. This is apparently the number of characters to be read and consequently uucico believes there is noone home and hangs up. Has anyone gotten TOP 2.0 UUCP running? Would you care to mail be your "systems" entries for a working machine? For reference my configuration is: 520 ST w/an extra 512K hand soldered in; very early rev. 20 Meg. atari disk, two side sided floppies SupraModem 2400 baud modem -- Dwight D. McKay -- Engineering Computer Network, Purdue University -- mckay@harbor.ecn.purdue.edu