fall@ektools.kodak.com (Jeffrey E. Fall) (05/18/91)
CoCo3 Parts for Sale! CoCo 3 Parts for Sale! Coco 3 Parts for Sale! As many of you have seen, I have ben trying to sell two complete systems. Having no such luck, I am now going to offer subsystems. I don't want to break apart the subsystems (yet) so, please only offer toward a subsystem as stated. I have too many computers and not enough time or space which is why this is happening: DISK Subsystems for CoCo3: Subsystem a: A standard issue grey floppy. This is the dual sided double density model, 40 trak dd. The case has it's own power supply and the drive is half height. I will also throw in the original Radio Shack Drive which is full height - probably 30 trak. Subsystem a includes: Disk case with builtin power supply 1/2 height 40trak dd floppy drive Original 30 trak full height floppy. Price: $40.00 plus shipping. Subsystem b: A hard drive Kit. A standard issue Burke and Burke adapter card and instruction book and disks with long cables to the disk drive from the Ompti XT style harddisk controller card. You must supply power supply for the disk drive and case. The disk drive is a Micropolis 1325D which is 71mb unformatted. I will also supply a boot disk which will boot the hard drive system from a 40trak dd floppy. The Burke and Burke unit also has a Real Time Clock built in. The Micropolis Hard-disk is ready to go with OS-9 software and loads of utilities. Subsystem b includes: Miicropolis 71mb 1325 disk drive Omti Hard Drive COntroller card, Xt style. Cables from the Ompti to the 1325 Hard disk. Burke and Burke hard disk card, case and disk and documentation. A boot disk for Slot #2 of the Multi Pak Adapter (MPI) toaster. Loads of OS9 software on the Harddisk. Price: $275.00 plus shipping plus C.O.D. Subsystem c: A hard drive Kit. A standard issue Disto Super Controller II card with an additional 4 in one card. This little fellow can talk SCSI with a SCSI hard disk, talk RS232 to a terminal, talk to a floppy drive, (takes the place of the 502 floppy) and it has a clock in it, (battery backed up). I will also include an Adaptec 4000a SCSI <---> MFM card. Here is the flowchart: COCO3<-->disto SCII--S-C-S-I-->Adaptec 4000A<--M-F-M-->1325D Hard drive I forgot to mention the harddrive - a Micropolis 1325d complete, formatted and ready to use. Subsystem c includes: Micropolis 71mb 1325d disk drive Disto SCII & 4in1 card Adaptec 4000A SCSI <---> MFM card Cables (all cables needed) 1 SCSI & 2 MFM power pak for the Disto SCII TTY cable for the Disto. Disks and documentation for the disto Price: $350.00 ********* CC3 Stuff ******************************** Items A: Multipak adapter. The classic Multipak Adapter with 4 slots for plugging stuff in. Typically the floppy 502 controller and Burke and Burke hard drive adapter cards go into this as can a serial card to talk to a modem or terminal. Item A is tested and is upgraded to COCO3 operation standards. Price: $75.00 firm. Item B: Multipak adapter. As above - untested. No Flames permitted you buy this (Item B) as is!!! Price: $50.00 firm. Item C: Disto Serial card. This Gem plugs into the Multipak and will talk RS232 to a terminal or Modem. This card comes with the one wire fix - a wire from the box to the CC3 to fix some kind of interrput hack. Works fine. Price: $40.00 firm Item D: Radio Shack Standard issue floppy drive case with two 40trak Double sided floppies mounted on side. Box is one unit of height, ie: full height. Drives are half height and look great one on top of the other in the box. The drives match - black fronts and the box is snow white. This unit is very clean and looks/runs new. Price: $125.00 Item E: Radio Shack FD-502 Controller card. This is used to interface the floppies (above) to either the Multipak or to the CC3 itself (without the Multipak). Price $40.00 Item F: A standard Issue Radio Shack CM-8 monitor. This thing has never ben moved anywhere and has less than 200 hours on it. I will ship in the original box with original packing material and manual. $135.00 plus shipping, (about $10.00 I bet). Items G: Two Radio Shack CC3 Computers. $60.00 a piece. work great, no problem, look very nice - not moved or been spilled on. Not modified or hacked in any way. CC3 computers: $60.00 for each, you pay shipping. Items H: Two 512K memory upgrade Kits: classic boards and chips. $60.00 per kit. Work fine. These are currently in the above CC3 computers. Will remove. Or, will sell each computer for $120.00 with 512K upgrade. ---------------------------------------------------------------- SOftware: Studioworks: Cable, disks and documentation: $25.00 OS9/CC3 C compiler with disks/doc. $50.00 Dynacalc with docs and disk $20.00 Thanks for talking the time to read this long list. Please, no substitutions at this time. If you are interested, please cut out the part of the message or item you are interested in, comment and mail it back to me at: fall@ektools.kodak.com or fall.ektools.kodakr.kodak.com * or * leave me a message at: 716-781-6587 or talk live between 8-4 M-F. Note: This distribution is only intended for the 48 States. I don't want to deal with international currency or shipping issues. Cheers, Jeff Fall